|
Group: Forum Members
Posts: 38,
Visits: 307
|
Yes, you'll get a shine off the bagging material but it'll be nothing like what you'd get from a proper mold. The bagging material will conform to the carbon fabric and you'll get lots of humps and bumps. Try a test piece and you'll see what i mean off.
Yes, you can refinish the peel ply finish but thats alot or elbow work.
In my experiance doing something like you've described needs a upper and lower mould. what kind of curve are we talking? Would a thinner sheet of persex not conform to the bend if you put the whole thing under vacuum? But again you'll need soric foam for the infusion.
|