Oven build

Talk Composites - The Forum for Advanced Composites

Back

Oven build

Author	Message
Darren	Darren posted 10 Years Ago HOT Post Details
Group: Forum Members Posts: 54, Visits: 916	taikuri (22/10/2015) Thanks to this thread i build my oven, well its almost done and its almost similar. Made it 110cm x 100cm x 60cm and 2.5kw element, heats up pretty fast. Hardest part to find some rockwool with Alu foil on a top here in Spain. Hopefully its ready in next few days. Im glad it helped you.. Mine works really well and holds the heat a lot better than i thought it would. The hardest part was working out how to use the pid controller
	Reply Like 3
Jacopo Carbonio	Jacopo Carbonio posted 10 Years Ago HOT Post Details
Group: Forum Members Posts: 43, Visits: 109	Hi Darren, I opened a new topic to know something about my question but nobody answered..so I thought to write you about it because of this topic, do you think you could help me? Thank you very much! http://www.talkcomposites.com/19949/Building-composites-oven-from-old-house-oven
	Reply Like 4
deceased10	deceased10 posted 9 Years Ago HOT Post Details
Group: Forum Members Posts: 29, Visits: 154	I've used a simialr setup for heating water for hydrographics! Be very careful with that solid state relay!!! I highly recommend you buy a heat sink to disipate the heat that will be caused from that SSR. I've seen to many fires/equipment failure from people not providing the proper cooling.
	Reply Like 3
67redrocket	67redrocket posted 9 Years Ago HOT Post Details
Group: Forum Members Posts: 49, Visits: 486	Hello, Iam also lookingat building a oven, what type of heater/fan is that?
	Reply Like 3