Oven build

Talk Composites - The Forum for Advanced Composites

Back

Oven build

Author	Message
Darren	Darren posted 10 Years Ago HOT Topic Details
Group: Forum Members Posts: 54, Visits: 916	Started an oven build today so thought i would make a thread to post my progress. This is all new to me so I'm sure il have some questions on the way, and you can all correct me if i do something wrong Made the frame out of 15mm steel box tube Then a 1mm steel outer skin What size element would be good for this size oven? Its 1 meter x 600mm x 600mm
	Reply Like 4
Reply
deceased10	deceased10 posted 9 Years Ago HOT Post Details
Group: Forum Members Posts: 29, Visits: 154	I've used a simialr setup for heating water for hydrographics! Be very careful with that solid state relay!!! I highly recommend you buy a heat sink to disipate the heat that will be caused from that SSR. I've seen to many fires/equipment failure from people not providing the proper cooling.
	Reply Like 3

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Threaded View

Oven build

Darren - 10 Years Ago

I hope you are going to insulate it? If so 2Kw will be ample. Brian.

Brian_s - 10 Years Ago

and earth it! Insulate the inside with celotex or similar, use a 2kW oven heater element and a fan...

ChrisR - 10 Years Ago

Yeah I'm going to insulate it with 50mm celotex. Where is the ideal place to mount the element? On...

Darren - 10 Years Ago

Looking good so far! are you going to have any runners for shelves inside the oven. I am about to...

davro - 10 Years Ago

[quote][b]davro (01/05/2015)[/b][hr]Looking good so far! are you going to have any runners for...

Darren - 10 Years Ago

Vac innovations

f1rob - 10 Years Ago

I would also recommend VacInnovations, they have all the kit you could possibly need and whenever I...

ChrisR - 10 Years Ago

Any more progress.

Shaneer22 - 10 Years Ago

looks badass !! keep us informing ! :)

wojtepanik - 10 Years Ago

:) It looks nice! I will keep an eye to understand how to build an oven for me

AlessandroPA - 10 Years Ago

Thanks for the comments guys. Haven't had much time on this so only a small update… Got the...

Darren - 10 Years Ago

Welll done! I can't wait to see the oven when completed ;) [quote][b]Darren...

AlessandroPA - 10 Years Ago

Another update. Slowly getting there now.. Made the controller box, this will also have the ssr...

Darren - 10 Years Ago

[quote][b]Darren (29/05/2015)[/b][hr]Another update. Fan motor mounted...

Tones67 - 10 Years Ago

Where I can find oven controllers? In Italy is hard to find :unsure:

Jacopo Carbonio - 10 Years Ago

For a good one: http://www.omega.co.uk/pptst/CN7800.html For a cheap one, eBay. Just be...

Hanaldo - 10 Years Ago

I got mine off ebay, a "used" CAL 9400 process controller. I paid about £50 for it and was brand new...

ChrisR - 10 Years Ago

Thank you! I'll search also for other stuff [quote][b]ChrisR (13/07/2015)[/b][hr]I got mine off...

Jacopo Carbonio - 10 Years Ago

Thanks to this thread i build my oven, well its almost done and its almost similar. Made it 110cm x...

taikuri - 10 Years Ago

[quote][b]taikuri (22/10/2015)[/b][hr]Thanks to this thread i build my oven, well its almost done...

Darren - 10 Years Ago

Hi Darren, I opened a new topic to know something about my question but nobody answered..so I...

Jacopo Carbonio - 10 Years Ago

I've used a simialr setup for heating water for hydrographics! Be very careful with that solid state...

deceased10 - 9 Years Ago

Hello, Iam also lookingat building a oven, what type of heater/fan is that?

67redrocket - 9 Years Ago

Reading This Topic

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google

Oven build

Oven build

Merge Selected

Threaded View

Similar Topics

Reading This Topic

Login

Explore

Messages

Mentions

Search