Oven build

Talk Composites - The Forum for Advanced Composites

Back

Oven build

Author	Message
67redrocket	67redrocket posted 10 Years Ago HOT Post Details
Group: Forum Members Posts: 49, Visits: 486	Hello, Iam also lookingat building a oven, what type of heater/fan is that?
	Reply Like 3
deceased10	deceased10 posted 10 Years Ago HOT Post Details
Group: Forum Members Posts: 29, Visits: 154	I've used a simialr setup for heating water for hydrographics! Be very careful with that solid state relay!!! I highly recommend you buy a heat sink to disipate the heat that will be caused from that SSR. I've seen to many fires/equipment failure from people not providing the proper cooling.
	Reply Like 3
Jacopo Carbonio	Jacopo Carbonio posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 43, Visits: 109	Hi Darren, I opened a new topic to know something about my question but nobody answered..so I thought to write you about it because of this topic, do you think you could help me? Thank you very much! http://www.talkcomposites.com/19949/Building-composites-oven-from-old-house-oven
	Reply Like 4
Darren	Darren posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 54, Visits: 916	taikuri (22/10/2015) Thanks to this thread i build my oven, well its almost done and its almost similar. Made it 110cm x 100cm x 60cm and 2.5kw element, heats up pretty fast. Hardest part to find some rockwool with Alu foil on a top here in Spain. Hopefully its ready in next few days. Im glad it helped you.. Mine works really well and holds the heat a lot better than i thought it would. The hardest part was working out how to use the pid controller
	Reply Like 3
taikuri	taikuri posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 13, Visits: 167	Thanks to this thread i build my oven, well its almost done and its almost similar. Made it 110cm x 100cm x 60cm and 2.5kw element, heats up pretty fast. Hardest part to find some rockwool with Alu foil on a top here in Spain. Hopefully its ready in next few days.
	Reply Like 3
Tones67	Tones67 posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 10, Visits: 73	[quote]Darren (29/05/2015) Another update. Fan motor mounted So that's a fan-forced oven element & fan? That looks like a nice, simple install.
	Reply Like 4
Jacopo Carbonio	Jacopo Carbonio posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 43, Visits: 109	Thank you! I'll search also for other stuff ChrisR (13/07/2015) I got mine off ebay, a "used" CAL 9400 process controller. I paid about £50 for it and was brand new in box. Whichever model/make you get ensure it's SSR compatable, look for Eurotherm too, another good make Hanaldo (13/07/2015) For a good one: http://www.omega.co.uk/pptst/CN7800.html For a cheap one, eBay. Just be aware that the ones on ebay can take some modification to make work, eg. not compatible with an SSR.
	Reply Like 4
ChrisR	ChrisR posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 363, Visits: 3K	I got mine off ebay, a "used" CAL 9400 process controller. I paid about £50 for it and was brand new in box. Whichever model/make you get ensure it's SSR compatable, look for Eurotherm too, another good make
	Reply Like 4
Hanaldo	Hanaldo posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 2.5K, Visits: 28K	For a good one: http://www.omega.co.uk/pptst/CN7800.html For a cheap one, eBay. Just be aware that the ones on ebay can take some modification to make work, eg. not compatible with an SSR.
	Reply Like 4
Jacopo Carbonio	Jacopo Carbonio posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 43, Visits: 109	Where I can find oven controllers? In Italy is hard to find
	Reply Like 4