Finished the mould and pulled the first half of an oil catch tank for a customers Hillclimb car. The plan is to pull a second half, bond the two together and then trim off the flange. Done with infusion 200grm CF - 2 x 290grm E Glass - 200grm CF. Weight of one half is 123grms, could probably loose one layer of E Glass. Capacity when finished will be 2 ltrs.

Warren

Carbon Copies Ltd

Hi Matthieu, bit of both I think

I used GC50. With the mould being quite deep and narrow I may of laid it down a bit heavy with the gelcoat gun. I use GC50 often not just for UV protection but mainly in this case to act like spray tack to hold the first layer of cloth in place.

Warren

Carbon Copies Ltd