+x BoB_from_jungle - 3/1/2020 12:12:10 PMHi guys!I'm beginner laminator so I will be appretiate you for you help.I have a round shaped mold. There is common 2 plies of 200 g 4H satin carbon fabric and extra 4 plies on the other area (support area). I have no idea how to impregnate this one by minimal quantity of resin. I guess I need at least two points of resin feed. One of this needed to be in the geometrical center of support area.Thanks
+x Buchado - 3/1/2020 9:05:45 PM+x BoB_from_jungle - 3/1/2020 12:12:10 PMHi guys!I'm beginner laminator so I will be appretiate you for you help.I have a round shaped mold. There is common 2 plies of 200 g 4H satin carbon fabric and extra 4 plies on the other area (support area). I have no idea how to impregnate this one by minimal quantity of resin. I guess I need at least two points of resin feed. One of this needed to be in the geometrical center of support area.ThanksHi Bob,the situation isn't clear to me, I can't understand the shape of your mold and where you must put carbon and resin.Can you elaborate it a little better? Maybe some picture of the mold.