Infusion strategy

Talk Composites - The Forum for Advanced Composites

Back

Infusion strategy

Author	Message
BoB_from_jungle	BoB_from_jungle posted 5 Years Ago HOT Topic Details
Group: Forum Members Posts: 7, Visits: 54	Hi guys! I'm beginner laminator so I will be appretiate you for you help. I have a round shaped mold. There is common 2 plies of 200 g 4H satin carbon fabric and extra 4 plies on the other area (support area). I have no idea how to impregnate this one by minimal quantity of resin. I guess I need at least two points of resin feed. One of this needed to be in the geometrical center of support area. Thanks
	Reply Like 5
Reply
BoB_from_jungle	BoB_from_jungle posted 5 Years Ago HOT Post Details
Group: Forum Members Posts: 7, Visits: 54	+x Buchado - 3/1/2020 9:05:45 PM +x BoB_from_jungle - 3/1/2020 12:12:10 PM Hi guys! I'm beginner laminator so I will be appretiate you for you help. I have a round shaped mold. There is common 2 plies of 200 g 4H satin carbon fabric and extra 4 plies on the other area (support area). I have no idea how to impregnate this one by minimal quantity of resin. I guess I need at least two points of resin feed. One of this needed to be in the geometrical center of support area. Thanks Hi Bob, the situation isn't clear to me, I can't understand the shape of your mold and where you must put carbon and resin. Can you elaborate it a little better? Maybe some picture of the mold. Hi In fact my part is oval shaped as I've drawn above (not round shaped) It's a flat part as well but has two plies on the whole area of the part and extra four plies on the area that I've drawn above. I don't know how to do infusion: where to locate feed line, quantity and where to locate vacuum if the laminate has one thickness - it's ok, I understand, but how to do infusion if you have two areas with two different thickness Edited 5 Years Ago by BoB_from_jungle
	Reply Like 5