Trouble with perfect finish


Trouble with perfect finish
View
Options
Author
Message
Davidpetty1988
Davidpetty1988
Davidpetty1988
posted 8 Years Ago HOT
Supreme Being (166 reputation)Supreme Being (166 reputation)Supreme Being (166 reputation)Supreme Being (166 reputation)Supreme Being (166 reputation)Supreme Being (166 reputation)Supreme Being (166 reputation)Supreme Being (166 reputation)Supreme Being (166 reputation)
Group: Forum Members
Posts: 26, Visits: 89
Hi I'm doing resin infusion and I'm very happy with the glossy finish apart from some tiny gaps around the fibres on the surface finish.any ideas where I might be going wrong?
http://www.talkcomposites.com/Uploads/Images/67f73a13-efe7-4660-8fd7-f42f.jpg
I hope its a clear enough picture thanks in advance 
Dave
Reply Like 3
GO

Merge Selected

Merge into selected topic...



Merge into merge target...



Merge into a specific topic ID...



Submit

Threaded View
Threaded View
Trouble with perfect finish
Davidpetty1988 - 8 Years Ago
     hi, looks dry try leaving the resin side clamp off for longer.
VVS - 8 Years Ago
     So clamp the vac side first then leave the resin side pumping for another 20-30 secs then clamp the...
Davidpetty1988 - 8 Years Ago
     It's dry. You have either clamped the resin too early, or you have allowed too much resin to be...
Hanaldo - 8 Years Ago
     Thanks very much guys will do that on my next peice . Dammit I love this forum site all you guys are...
Davidpetty1988 - 8 Years Ago
     As previously said clamp the resin output line first and allow the vacuum in the bag to suck in some...
davro - 8 Years Ago

Similar Topics

Post Quoted Reply
Reading This Topic

Powered by InstantForum 2017-0 Final © 2024
Execution: 0.000. 2 queries. Compression Enabled.
Explore
Messages
Mentions
Search