Talk Composites - The Forum for Advanced Composites
Back
Login
Register
Login
Register
Home
»
Advanced Composites Forum
»
General Composites Discussion
»
Non distructive bond seperation
Non distructive bond seperation
Post Reply
Like
2
Non distructive bond seperation
View
Flat Ascending
Flat Descending
Threaded
Options
Subscribe to topic
Print This Topic
Goto Topics Forum
Author
Message
Tony Corke
Tony Corke
posted 7 Years Ago
ANSWER
HOT
Topic Details
Group: Forum Members
Posts: 1,
Visits: 3
Hi,
I want to seperate a fillament wound carbon tube from a steel bicycle frame that was bonded using Vuduglu
Can this be done without cutting the tube or damaging the carbon tube or the steel frame? heat, acetone etc?
Cheers Tony
Reply
Like
2
Reply
f1rob
f1rob
posted 7 Years Ago
ANSWER
HOT
Post Details
Group: Forum Members
Posts: 237,
Visits: 4.8K
The best way is heat and movement.
If you can apply the heat to the inside of the meal tube so it transfers outwards to the glue before the carbon even better
Reply
Like
2
GO
Merge Selected
Merge into selected topic...
Merge into merge target...
Merge into a specific topic ID...
Open Merge
Threaded View
Threaded View
Non distructive bond seperation
Tony Corke
-
7 Years Ago
Googling this brings up many solvents, but readily available acetone is frequently mentioned. Try it on a test piece first.
Steve Broad
-
7 Years Ago
Unfortunately no off the shelf solvents will touch cured adhesive. Also The bond strength is typically higher than the interlaminar sheer strength of carbon fibre so ripping it apart is likely to...
Warren (Staff)
-
7 Years Ago
The best way is heat and movement. If you can apply the heat to the inside of the meal tube so it transfers outwards to the glue before the carbon even better
f1rob
-
7 Years Ago
Post Reply
Like
2
Similar Topics
Post Quoted Reply
Reading This Topic
Login
Login
Remember Me
Reset Password
Resend Validation Email
Login
Facebook
Google
Explore
Messages
Mentions
Search