Non distructive bond seperation


Non distructive bond seperation
View
Options
Author
Message
Tony Corke
Tony Corke
Tony Corke
posted 7 Years Ago HOT
Junior Member (13 reputation)Junior Member (13 reputation)Junior Member (13 reputation)Junior Member (13 reputation)Junior Member (13 reputation)Junior Member (13 reputation)Junior Member (13 reputation)Junior Member (13 reputation)Junior Member (13 reputation)
Group: Forum Members
Posts: 1, Visits: 3
Hi,
I want to seperate a fillament wound carbon tube from a steel bicycle frame that was bonded using Vuduglu 
Can this be done without cutting the tube or damaging the carbon tube or the steel frame? heat, acetone etc?

Cheers Tony
Reply Like 2
GO

Merge Selected

Merge into selected topic...



Merge into merge target...



Merge into a specific topic ID...



Submit

Threaded View
Threaded View
Non distructive bond seperation
Tony Corke - 7 Years Ago
     Googling this brings up many solvents, but readily available acetone is frequently mentioned. Try it on a test piece first.
Steve Broad - 7 Years Ago
     Unfortunately no off the shelf solvents will touch cured adhesive. Also The bond strength is typically higher than the interlaminar sheer strength of carbon fibre so ripping it apart is likely to...
Warren (Staff) - 7 Years Ago
     The best way is heat and movement. If you can apply the heat to the inside of the meal tube so it transfers outwards to the glue before the carbon even better
f1rob - 7 Years Ago

Similar Topics

Post Quoted Reply
Reading This Topic

Powered by InstantForum 2017-0 Final © 2025
Execution: 0.000. 2 queries. Compression Enabled.
Explore
Messages
Mentions
Search