is easycomp pre-preg good for structural use ?


is easycomp pre-preg good for structural use ?
View
Options
Author
Message
sss
sss
sss
posted 11 Years Ago HOT
Forum Member (33 reputation)Forum Member (33 reputation)Forum Member (33 reputation)Forum Member (33 reputation)Forum Member (33 reputation)Forum Member (33 reputation)Forum Member (33 reputation)Forum Member (33 reputation)Forum Member (33 reputation)
Group: Forum Members
Posts: 5, Visits: 96
hello guys 
new member here Smile
i want to make some structural assemblies from pre-preg cf and i wonder if easycomposites cf is strong enough , or is it just for show purpose / body panels use only ?
for example , when i compare resin properties to cycom 2020 which is used in formula 1 etc i see big difference , but the measurements were made on different systems (iso and astm)

i added the mechanical properties , so how those two can be compared ?



easycomposites :

http://www.talkcomposites.com/Uploads/Images/bd3c2d6c-9f26-4d64-9d58-8268.jpg

cytec cycom 2020 :
http://www.talkcomposites.com/Uploads/Images/19d7cddf-2255-4030-8b99-43ba.jpg
Reply Like 2
Reply
sss
sss
sss
posted 10 Years Ago HOT
Forum Member (33 reputation)Forum Member (33 reputation)Forum Member (33 reputation)Forum Member (33 reputation)Forum Member (33 reputation)Forum Member (33 reputation)Forum Member (33 reputation)Forum Member (33 reputation)Forum Member (33 reputation)
Group: Forum Members
Posts: 5, Visits: 96
thank for replying . 
Reply Like 3
GO

Merge Selected

Merge into selected topic...



Merge into merge target...



Merge into a specific topic ID...



Submit

Threaded View
Threaded View
is easycomp pre-preg good for structural use ?
sss - 11 Years Ago
     no one ? :)
sss - 11 Years Ago
             interesting question!
matthieutje65 - 11 Years Ago
     Iam also interested in a reply.
Shaneer22 - 11 Years Ago
     Iam also interested in a reply.
Shaneer22 - 11 Years Ago
     [quote][b]sss (26/12/2014)[/b][hr]hello guys new member here :) i want to make some structural...
brainfart - 11 Years Ago
     then where can i find any data regarding easycomp pre-preg ? how strog this out of autoclave carbon...
sss - 10 Years Ago
             It depends on what structural part you are making. Autoclave parts allow repeatability and...
ChrisR - 10 Years Ago
     These are the figures for a Cure at 130 °C for 60 minutes on the press with 3 b ar pressure...
Warren (Staff) - 10 Years Ago
     thank for replying .
sss - 10 Years Ago
     one more question ... if i want to cure @130c , the mold materials can hold up to 80c only , can i...
sss - 10 Years Ago
     You can,but very slowly increase tempreture so parts does not deform.i have post cured unimold upto...
Shaneer22 - 10 Years Ago
     Sorry, You have post cured a part with a unimold mandrel Or you have used the unimold at curing...
creator - 10 Years Ago

Similar Topics

Post Quoted Reply
Reading This Topic

Powered by InstantForum 2017-0 Final © 2025
Execution: 0.000. 2 queries. Compression Enabled.
Explore
Messages
Mentions
Search