Talk Composites - The Forum for Advanced Composites
Back
Login
Register
Login
Register
Home
»
Advanced Composites Forum
»
General Composites Discussion
»
Vacuum bagging when skinning
Vacuum bagging when skinning
Post Reply
Like
3
Vacuum bagging when skinning
View
Flat Ascending
Flat Descending
Threaded
Options
Subscribe to topic
Print This Topic
Goto Topics Forum
Author
Message
redrumredrum89
redrumredrum89
posted 11 Years Ago
ANSWER
HOT
Topic Details
Group: Forum Members
Posts: 8,
Visits: 77
Can you use any kind of vacuum bagging Technic for skinning ? Thanks
Reply
Like
3
Reply
redrumredrum89
redrumredrum89
posted 11 Years Ago
ANSWER
HOT
Post Details
Group: Forum Members
Posts: 8,
Visits: 77
Is that resin of cf folded up?Can you use pill-ply then apply more resin. Im thinking it would cut the amount of work but not sure.
Reply
Like
2
GO
Merge Selected
Merge into selected topic...
Merge into merge target...
Merge into a specific topic ID...
Open Merge
Threaded View
Threaded View
Vacuum bagging when skinning
redrumredrum89
-
11 Years Ago
You can vacuum it when getting the carbon to stick to the base layer yes
ajb100
-
11 Years Ago
could you just sand the part then wet the cf lay it on there and vacuum bag it? would it be a good...
redrumredrum89
-
11 Years Ago
It will work and if you work with a stretchable bagging material it will give you a good finish...
matthieutje65
-
11 Years Ago
yes and get troubles like here ;)
TomDesign
-
11 Years Ago
Is that resin of cf folded up?Can you use pill-ply then apply more resin. Im thinking it would cut...
redrumredrum89
-
11 Years Ago
and after you brush it and lay resin anyway you see like lines from blade on a surface of carbon.
TomDesign
-
11 Years Ago
that blade places are outside and inside from seems vacuuming bag wrinkles , i dont get it can not...
TomDesign
-
11 Years Ago
Post Reply
Like
3
Similar Topics
Post Quoted Reply
Reading This Topic
Login
Login
Remember Me
Reset Password
Resend Validation Email
Login
Facebook
Google
Explore
Messages
Mentions
Search