Vacuum bagging when skinning


Vacuum bagging when skinning
View
Options
Author
Message
redrumredrum89
redrumredrum89
redrumredrum89
posted 11 Years Ago HOT
Forum Guru (62 reputation)Forum Guru (62 reputation)Forum Guru (62 reputation)Forum Guru (62 reputation)Forum Guru (62 reputation)Forum Guru (62 reputation)Forum Guru (62 reputation)Forum Guru (62 reputation)Forum Guru (62 reputation)
Group: Forum Members
Posts: 8, Visits: 77
Can you use any kind of vacuum bagging Technic for skinning ?  Thanks 
Reply Like 3
Reply
Matthieu Libeert
Matthieu Libeert
Matthieu Libeert
posted 11 Years Ago HOT
Supreme Being (7.5K reputation)Supreme Being (7.5K reputation)Supreme Being (7.5K reputation)Supreme Being (7.5K reputation)Supreme Being (7.5K reputation)Supreme Being (7.5K reputation)Supreme Being (7.5K reputation)Supreme Being (7.5K reputation)Supreme Being (7.5K reputation)
Group: Forum Members
Posts: 955, Visits: 3.4K
It will work and if you work with a stretchable bagging material it will give you a good finish straight from the bag.
About putting it in place: add some resin, let it go to a tacky state place the carbon, wet the carbon, add bag and done Wink

Matthieu Libeert
Founder MAT2 Composites X Sports
website: www.mat2composites.com
Reply Like 2
GO

Merge Selected

Merge into selected topic...



Merge into merge target...



Merge into a specific topic ID...



Submit

Threaded View
Threaded View
Vacuum bagging when skinning
redrumredrum89 - 11 Years Ago
     You can vacuum it when getting the carbon to stick to the base layer yes
ajb100 - 11 Years Ago
     could you just sand the part then wet the cf lay it on there and vacuum bag it? would it be a good...
redrumredrum89 - 11 Years Ago
             It will work and if you work with a stretchable bagging material it will give you a good finish...
matthieutje65 - 11 Years Ago
     yes and get troubles like here ;)
TomDesign - 11 Years Ago
             Is that resin of cf folded up?Can you use pill-ply then apply more resin. Im thinking it would cut...
redrumredrum89 - 11 Years Ago
     and after you brush it and lay resin anyway you see like lines from blade on a surface of carbon.
TomDesign - 11 Years Ago
     that blade places are outside and inside from seems vacuuming bag wrinkles , i dont get it can not...
TomDesign - 11 Years Ago

Similar Topics

Post Quoted Reply
Reading This Topic

Powered by InstantForum 2017-0 Final © 2025
Execution: 0.000. 2 queries. Compression Enabled.
Explore
Messages
Mentions
Search