+x Hanaldo - 2/12/2020 3:28:09 AM+x Hojo - 2/12/2020 1:11:54 AMI find it hard to believe it came from the Porsche factory like this. Are you sure there wasn't damage to it, then someone tried to repair it? Ive seen these GT2RS roofs in person several times and they always had an A class finish. To fix it you would need to wet sand the surface down all the way until orange peel is gone, then polish it. Otherwise you would need to sand it flat and clear coat againLooks like they have already rubbed through the clear coat into the carbon though, so I feel it will need the full process. I'm also surprised this is from Porsche, this is a full on amateur job. Haven't seen orange peel like that since I first started spraying. Dezer, yes, flatting the clear coat down and respraying it will certainly fix the issue - orange peel is a paint issue. I feel Porsche should be more than capable of rectifying it, in fact I'm surprised they aren't damn ashamed of that and demanded it back to fix the issue. Something doesn't feel right if this is what they have delivered.
+x Hojo - 2/12/2020 1:11:54 AMI find it hard to believe it came from the Porsche factory like this. Are you sure there wasn't damage to it, then someone tried to repair it? Ive seen these GT2RS roofs in person several times and they always had an A class finish. To fix it you would need to wet sand the surface down all the way until orange peel is gone, then polish it. Otherwise you would need to sand it flat and clear coat again