Porosity and delam at joggle area-help needed

Author	Message
ejump80	ejump80 posted 8 Years Ago HOT Topic Details
Group: Forum Members Posts: 2, Visits: 104	Hi all, I'm working with the part ( refer pic) that has joggle area. After cure, this part easily create a porosity and delam at this area. I believe it is because of the bridging between the first and second ply carbon woven. As in pic, we put peel ply to bleed the excess resin betwen the first and two plies. Also in final bag, we cut off the N10 bagging at the radiius to minimize the bridging.But still the result is still inconsistent. Need help. Thanks Attachments IMG-20170318-WA0005.jpg (636 views, 176.00 KB) Tags delaminatio Porosity
	Reply Like 4
Reply
scottracing	scottracing posted 8 Years Ago HOT Post Details
Group: Forum Members Posts: 460, Visits: 5.2K	Why are you placing the peel ply between plies? This isnt a good idea. If you want to bleed resin our use perforated release film in that area to bleed out into the bleeder cloth.
	Reply Like 4