SNEAK PREVIEW VIDEO

Talk Composites - The Forum for Advanced Composites

Back

SNEAK PREVIEW VIDEO

Author	Message
Daz	Daz posted 14 Years Ago HOT Topic Details
Group: Forum Members Posts: 93, Visits: 651	Just watched it and Its just what i needed very informative , Will it be possible to buy a dvd when its finnished ?
	Reply Like 8
Replies
Matt (Staff)	Matt (Staff) posted 14 Years Ago HOT Post Details
Group: Forum Members Posts: 680, Visits: 1.9K	I notice you have used a couple of products in the video that you do not sell on your site, namely the polyester gel coat, tack spray and release tape. Could you tell me if you intend to start selling these products? Yes, we'll be selling all of those, plus the cup-gun. The release tape will be with us next week, the epoxy compatible polyester spray-gel we're working on a distribution deal for at the moment and the spray-tack we'll also have pretty soon. And those smiles when you demold the parts are epic... Haha! - True; we've been doing this for years and the pleasure I get when something just pops straight out and looks perfect hasn't faded one bit. - When we do the video it's even more important than in normal production that the part comes out right - we never cheat so when we de-mould we're doing it for real and me and the viewer see the part for the first time at the same time. I loose sound for a minute or so at 4:20. Again at 15:00 for 10 seconds. tried reloading it but still the same. Yes, again, it's just an early edit so that I can get some feedback and also keep the 'sneak previews' coming to share on the forum. There's some voiceover to go in there. Also you sped up the infusion. How long was it in real life? Might be useful to edit the commentry to mention it to reassure people they are doing it right if it seems like its taking a while for them. Yes, again, there will be voiceover there too and we'll show a clock graphic in the bottom corner of the screen to give the exact details of the time the infusion takes. The top of the bonnet was 60 mins, the inside was 38mins (the 660g carbon infuses very quickly). For any quality obsessives out there, you can also watch the same video in full 1080 resolution using this Vimeo link: http://vimeo.com/38725958 Matt Statham Easy Composites / Carbon Mods - Technical Sales
	Reply Like 6
Warren	Warren posted 14 Years Ago HOT Post Details
Group: Administrators Posts: 214, Visits: 783	Matt (Staff) (19/03/2012) we never cheat so when we de-mould we're doing it for real and me and the viewer see the part for the first time at the same time. Yes, again, it's just an early edit so that I can get some feedback and also keep the 'sneak previews' coming to share on the forum. There's some voiceover to go in there. Yes, again, there will be voiceover there too and we'll show a clock graphic in the bottom corner of the screen to give the exact details of the time the infusion takes. The top of the bonnet was 60 mins, the inside was 38mins (the 660g carbon infuses very quickly). Did think you were going to burst out giggling at that point Thought there might be some extra voiceovers.
	Reply Like 6

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Threaded View

SNEAK PREVIEW VIDEO

Daz - 14 Years Ago

Agree with Daz, the video is great. Informative and professional. Wish I was a hacker, so i would...

Joe - 14 Years Ago

hello I also needed it is very informative ! very good matt, you can write how to do it ?...

+cosworth - 14 Years Ago

Well Matt, I think you guy's did a great job and I think these videos will answer allot of questions...

twissta - 14 Years Ago

Yeah I agree with the guys, really interesting and informative. What I like is the detail, it's so...

OrtonPortion - 14 Years Ago

That was spot-on I know it's not the final edit but i learned alot from that... I might have to...

MAVERICK - 14 Years Ago

i want to see how you guys pull apart from it. ;)

japcarmaniac - 14 Years Ago

You will soon enough. We've already done it so I know it goes well! - I hope to be uploading another...

Matt (Staff) - 14 Years Ago

Wow Just Last weak I was looking at a part wondering exactly how to do it, its nota hood, but a roof...

Carbon Tuner - 14 Years Ago

Hi, The green gelcoat is epoxy gelcoat and the black gelcoat shown in the unimold system video is...

Joe - 14 Years Ago

Hi Joe, You are spot-on with the theoretical HDT for the gel-coats, however recently we have been...

Paul (Staff) - 14 Years Ago

Hmm, I can't see me getting into heat cure. What temp do people usually do this at? So your saying...

Carbon Tuner - 14 Years Ago

I know some prepregs sold by EC will cure at about 80-90°, so Unimold would do the trick, while...

Joe - 14 Years Ago

Hi Joe, As usual, you're right on all this. When working with the putty system (epoxy tooling gel...

Matt (Staff) - 14 Years Ago

Just a quick question about your uni mould system. I have only briefly looked but I'm struggling...

Dave - 14 Years Ago

Thanks, Paul, thats a good thing to know about that epoxy gelcoat ;)

Joe - 14 Years Ago

Anyupdate for when will new videos be uploaded?

Joe - 14 Years Ago

I hope to upload part2 next part next week (I had some IT issues!) and then the remaining parts soon...

Matt (Staff) - 14 Years Ago

[quote][b]Matt (Staff) (17/02/2012)[/b][hr]I hope to upload part2 next part next week (I had some IT...

japcarmaniac - 14 Years Ago

Sweet...

Joe - 14 Years Ago

any updates on the new video:)

japcarmaniac - 14 Years Ago

Any news on part 2 of the video?

marc37i - 14 Years Ago

Hi Guys, We filmed the trim and bonding of the final part yesterday, we just have the polish and...

Paul (Staff) - 14 Years Ago

Haha awesome. I cant wait to watch it !! Well, as you asked what we would like to see, here's my...

Joe - 14 Years Ago

Hi Folks, Here's a sneak peak of part 2:...

Matt (Staff) - 14 Years Ago

Hi Matt, Great video! I notice you have used a couple of products in the video that you do not...

marc37i - 14 Years Ago

Hi Matt Ditto to what Marc just posted :-)

Daz - 14 Years Ago

Thats some nice video. I'm with Daz and Mark about the new products that you are using. And those...

Joe - 14 Years Ago

thats a very good tutorial again guys! I've enjoyed watching it and got me motivated to make some...

matthieutje65 - 14 Years Ago

Nice graphics at the start!! I loose sound for a minute or so at 4:20. Again at 15:00 for 10...

Warren - 14 Years Ago

[quote] I notice you have used a couple of products in the video that you do not sell on your site,...

Matt (Staff) - 14 Years Ago

[quote][b]Matt (Staff) (19/03/2012)[/b][hr] we never cheat so when we de-mould we're doing it for...

Warren - 14 Years Ago

Hi, A few suggestions: - Specifying which tip diameter for the gun, along with the working...

Joe - 14 Years Ago

Hi Joe, Thanks for the feedback; it's all useful and will help me to get things as clear as...

Matt (Staff) - 14 Years Ago

Any news on the last video? Awesome video tutorials BTW.

BoostSamurai - 14 Years Ago

Plan is to upload them all tonight! Watch this space.

Matt (Staff) - 14 Years Ago

Believe me, I'll be watching ;)

BoostSamurai - 14 Years Ago

Cant wait....

Joe - 14 Years Ago

Looking forward to this :D

Jut - 14 Years Ago

Sorry, couldn't resist :P

BoostSamurai - 14 Years Ago

RE: SNEAK PREVIEW VIDEO

Joe - 14 Years Ago

I see what you did there good Sir. Well played ;) lol I'm so hanging out for this new video!!!!...

BoostSamurai - 14 Years Ago

It's all online now folks in its full editted down glory! All three videos are live. Now that...

Matt (Staff) - 14 Years Ago

[quote][b]Matt (Staff) (22/04/2012)[/b][hr]When you watch them through the Learning Centre you'll...

JanM - 14 Years Ago

Hi Jan, It's on order, we're just waiting for it to come in. We were lined up to distribute a...

Matt (Staff) - 14 Years Ago

Haha, about time, huh? Great video serie. I've watched the 3 and they are great. The little things...

Joe - 14 Years Ago

Thanks Joe, The next video will be how to repair a damaged carbon/kevlar kayak because we filmed it...

Matt (Staff) - 14 Years Ago

Thanks for the latest vid Matt! I've already watched the first two but I'm going to watch them...

BoostSamurai - 14 Years Ago

Great Stuff! Out of interest how much did the original bonnet weigh? Dave.

Dave - 14 Years Ago

Hi Dave, I saw your post yesterday and meant to weigh the original when I was back at the studio...

Matt (Staff) - 14 Years Ago

Reading This Topic

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google