Hi

What's the (nominal) thickness of the pre-formed tapes - the same as 2/2 195g cloth (.28mm)?

Looking at custom bicycle 'guards, so want an arc of circa 850mm length by 25mm width on a 280mm radius,  but the clearance between tyre and frame is ~1.5mm, so there's not a lot of room for multiple layers...

Shouldn't be too bad, as it's linear arc.

QUICK QUESTION: The heat shrink tape - can't see any indication of whether it's interior or exterior face (with respect to a presented roll) that should be applied to epoxy layer, i.e. there's no adhesive on either side of tape - if this is so I take it either way up is OK, before applying heat...