90 degree carbon fiber angle

Talk Composites - The Forum for Advanced Composites

Back

90 degree carbon fiber angle

90 degree carbon fiber angle

Author	Message
Elias_GR	Elias_GR posted 5 Years Ago HOT Topic Details
Group: Forum Members Posts: 11, Visits: 604	I need to make some 90 degree angles. I also need them to be gloss on both sides. I tried make to separate angles and then glue them with 2 part epoxy glue but they are not as stiff as i need them to be and there is some delamination when i apply pressure on them. What can i do so i can have a gloss finish on both sides?
	Reply Like 4
Reply
Warren (Staff)	Warren (Staff) posted 5 Years Ago HOT Post Details
Group: Administrators Posts: 2.5K, Visits: 8.5K	For most wet lay vacuum bagging you want about 20% vacuum to start with then adjust to suit the results. Warren Penalver Easy Composites / Carbon Mods - Technical Support Assistant
	Reply Like 5

GO

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Threaded View

Threaded View

90 degree carbon fiber angle

Elias_GR - 5 Years Ago

Try two nice and thick aluminium angle sections then wet lay and do a bit of compression moulding by clamping them together. You can put them in a vacuum bag with a bit of breather to do the same...

Warren (Staff) - 5 Years Ago

Thanks a lot for the answer Warren! This is exactly the first idea i had for them. I did them exactly like how you described it but i got a lot of dry spots in the fabrics and a lot pinholes. Maybe i...

Elias_GR - 5 Years Ago

For most wet lay vacuum bagging you want about 20% vacuum to start with then adjust to suit the results.

Warren (Staff) - 5 Years Ago

Similar Topics

Post Quoted Reply

Reading This Topic

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google

Explore

Messages

Mentions

Search