Porosity and delam at joggle area-help needed


Porosity and delam at joggle area-help needed
View
Options
Author
Message
ejump80
ejump80
ejump80
posted 8 Years Ago HOT
Junior Member (18 reputation)Junior Member (18 reputation)Junior Member (18 reputation)Junior Member (18 reputation)Junior Member (18 reputation)Junior Member (18 reputation)Junior Member (18 reputation)Junior Member (18 reputation)Junior Member (18 reputation)
Group: Forum Members
Posts: 2, Visits: 104
Hi all,
I'm working with the part ( refer pic) that has joggle area. 
After cure, this part easily create a porosity and delam at this area. I believe it is because of the bridging between the first and second ply carbon woven. As in pic, we put peel ply to bleed the excess resin betwen the first and two plies. 
Also in final bag, we cut off the N10 bagging at the radiius to minimize the bridging.But still the result is still inconsistent.

Need help.

Thanks
Attachments
IMG-20170318-WA0005.jpg (637 views, 176.00 KB)
Reply Like 4
Reply
ejump80
ejump80
ejump80
posted 8 Years Ago HOT
Junior Member (18 reputation)Junior Member (18 reputation)Junior Member (18 reputation)Junior Member (18 reputation)Junior Member (18 reputation)Junior Member (18 reputation)Junior Member (18 reputation)Junior Member (18 reputation)Junior Member (18 reputation)
Group: Forum Members
Posts: 2, Visits: 104
Below details of the product;
1) Sandwich panel-fabricate using carbon fiber reinforced prepreg,5HS fabric/280g/m2/180 deg curing with nomex core.
2) cure with 2 step cure cycle, dwell at 105 deg C for 30 minutes, then continue heat up at 180 deg C, stsrt 2nd dwell when reach 175deg c for 160 minutes then start cool down until 60 deg C
.Full vacuum start cure and reduce until -0.2bars when pressure reach 1.4bar.
Cure pressure 3 bars
3)Tool made from nickel

Currently, we have problem at the joggle area because the 1st and 2nd layer plies lack of contact on the mould surface which create bridging and delamination.
Attachments
IMG-20170322-WA0010.jpg (593 views, 71.00 KB)
IMG-20170306-WA0005.jpg (557 views, 105.00 KB)
Edited 8 Years Ago by ejump80
Reply Like 4
GO

Merge Selected

Merge into selected topic...



Merge into merge target...



Merge into a specific topic ID...



Submit

Threaded View
Threaded View
Porosity and delam at joggle area-help needed
ejump80 - 8 Years Ago
     Have you got any more details about the mould, cure cycle, type of resins and fabrics used as it is...
Warren (Staff) - 8 Years Ago
             Below details of the product; 1) Sandwich panel-fabricate using carbon fiber reinforced prepreg,5HS...
ejump80 - 8 Years Ago
     Why are you placing the peel ply between plies? This isnt a good idea. If you want to bleed resin...
scottracing - 8 Years Ago

Similar Topics

Post Quoted Reply
Reading This Topic

Powered by InstantForum 2017-0 Final © 2025
Execution: 0.000. 3 queries. Compression Enabled.
Explore
Messages
Mentions
Search