Getting a logo on a finished CF part?


Getting a logo on a finished CF part?
View
Options
Author
Message
KeyboardWarrior
KeyboardWarrior
KeyboardWarrior
posted 12 Years Ago HOT
Forum Member (48 reputation)Forum Member (48 reputation)Forum Member (48 reputation)Forum Member (48 reputation)Forum Member (48 reputation)Forum Member (48 reputation)Forum Member (48 reputation)Forum Member (48 reputation)Forum Member (48 reputation)
Group: Forum Members
Posts: 4, Visits: 14
Hi,

Any suggestions as to how to put a great looking logo onto a finished carbon fibre part? I'm thinking a logo in silver should look good against the carbon fibre background.

I'm guessing silver wording on a clear adhesive label would do if quality wasn't an issue, but how would you go about it if the only concern was making the finished part look really professional?

Thanks in advance!
Reply Like 2
GO

Merge Selected

Merge into selected topic...



Merge into merge target...



Merge into a specific topic ID...



Submit

Threaded View
Threaded View
Getting a logo on a finished CF part?
KeyboardWarrior - 12 Years Ago
     Hi, I use graphics quite a lot on my parts. I do it two ways. I invested in a Vinyl Plotter Cutter...
wozza - 12 Years Ago
     look at my posts i always put logos and stickers under resin. only do not ever put logo under...
TomDesign - 12 Years Ago
     Very helpful suggestions. Thank you.
KeyboardWarrior - 12 Years Ago
     Warren I'm glad you said that! I have been toying with the idea for a while as I use gc50 most of...
Ortonporton - 12 Years Ago
             Hi, I did a sign for outside the workshop 1m x 1m with 80mm high letters and that turned out ok. I...
wozza - 12 Years Ago
     Another way for embossed logo's is to put a mirror image vinyl on the mould and release coat over...
Warren (Staff) - 12 Years Ago
             Another method I use which is a bit more subtle is to use the vinyl graphics/ letters etc as a mask....
wozza - 12 Years Ago
     Just a note from a failure that may help someone else. I used a thermal transfer color print on...
Farbin Kaiber - 12 Years Ago

Similar Topics

Post Quoted Reply
Reading This Topic

Powered by InstantForum 2017-0 Final © 2025
Execution: 0.000. 2 queries. Compression Enabled.
Explore
Messages
Mentions
Search