Infusion on old mold without flanges

Talk Composites - The Forum for Advanced Composites

Back

Infusion on old mold without flanges

Author	Message
_GABBER	_GABBER posted 12 Years Ago Post Details
Group: Forum Members Posts: 41, Visits: 646	you can help the resin flow on the edges with a heat gun...or put before your mold in the oven, or make a heated mold. I'm trying now a heated mold with RTMLight
	Reply Like 1
_GABBER	_GABBER posted 12 Years Ago Post Details
Group: Forum Members Posts: 41, Visits: 646	prsw (19/01/2013) _GABBER (18/01/2013) matthieutje65 (18/01/2013) Gabber, do you have smoe pictures of the set-up before infusion? quit curious about how the spiral is layed around then this is a carbon fibre mold made with resin infusion. If you look around you see the vacuum spiral Thanks again, Can the feed spiral can be placed in the middle of the tool and stil spread the resin as long as there is a dist-mesh with vacuum on either side? So the resin does not flow, or very little beyond/outside the dist-mesh? Do you get any resin on the back of the mold? I place the spiral in the midlle of the tool, and I infuse like the picture. Resin flow a little outside the mesh, for my esperience about 3/4 cm, so I cut mesh smaller than the fiber. I never had problems infusing like this. On the back of the mold there is a little resin, but if you places well the bag, it's acceptable.
	Reply Like 1
CompositeSeb	CompositeSeb posted 12 Years Ago Post Details
Group: Forum Members Posts: 14, Visits: 161	Subscribed to your RSS. Symmetry is such a pain when it comes to modeling. Very few tutorials or books etc on the subject. Nice work.
	Reply Like 1
prsw	prsw posted 12 Years Ago Post Details
Group: Forum Members Posts: 112, Visits: 1K	CompositeSeb (19/01/2013) I just checked your site Petter, awesome work on the Cagiva Raptor. I used to race motorcycles too (French championship, trained 3 weeks with Kenny Roberts in Spain etc...) and although my sculptures are usually pure art rather than functional art, I've been flirting with the idea of building motorcycles.. Cheers from France. Do it, it is great work. be sure to look at my blog also: motoform.blogspot.com http://motoform.blogspot.se Edited 12 Years Ago by prsw
	Reply Like 1
CompositeSeb	CompositeSeb posted 12 Years Ago Post Details
Group: Forum Members Posts: 14, Visits: 161	I just checked your site Petter, awesome work on the Cagiva Raptor. I used to race motorcycles too (French championship, trained 3 weeks with Kenny Roberts in Spain etc...) and although my sculptures are usually pure art rather than functional art, I've been flirting with the idea of building motorcycles.. Cheers from France.
	Reply Like 1
prsw	prsw posted 12 Years Ago Post Details
Group: Forum Members Posts: 112, Visits: 1K	_GABBER (18/01/2013) matthieutje65 (18/01/2013) Gabber, do you have smoe pictures of the set-up before infusion? quit curious about how the spiral is layed around then this is a carbon fibre mold made with resin infusion. If you look around you see the vacuum spiral Thanks again, Can the feed spiral can be placed in the middle of the tool and stil spread the resin as long as there is a dist-mesh with vacuum on either side? So the resin does not flow, or very little beyond/outside the dist-mesh? Do you get any resin on the back of the mold? http://motoform.blogspot.se Edited 12 Years Ago by prsw
	Reply Like 1
Matthieu Libeert	Matthieu Libeert posted 12 Years Ago Post Details
Group: Forum Members Posts: 955, Visits: 3.4K	Thanks Gabber for the info! looks great Matthieu Libeert Founder MAT2 Composites X Sports website: www.mat2composites.com
	Reply Like 1
_GABBER	_GABBER posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 41, Visits: 646	matthieutje65 (18/01/2013) Gabber, do you have smoe pictures of the set-up before infusion? quit curious about how the spiral is layed around then this is a carbon fibre mold made with resin infusion. If you look around you see the vacuum spiral other side final piece
	Reply Like 2
Matthieu Libeert	Matthieu Libeert posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 955, Visits: 3.4K	Gabber, do you have smoe pictures of the set-up before infusion? quit curious about how the spiral is layed around then Matthieu Libeert Founder MAT2 Composites X Sports website: www.mat2composites.com
	Reply Like 2
nutz	nutz posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 14, Visits: 58	Thats interesting to know, I have a few molds without flnages that i thought we be no good for resin infusion. Wont have to chuck em away and start again now
	Reply Like 2