By prsw - 1/15/2013 8:32:17 PM
Hi all
I plan to start with infusion now and one part I want to do has a mold
that I did some years ago when I only did wet layup, it has almost no flanges.
So I have to use an envelope bag, but is that possible with infusion?
Or will the resin go around the whole mold?
|
By _GABBER - 1/19/2013 2:39:50 PM
you can help the resin flow on the edges with a heat gun...or put before your mold in the oven, or make a heated mold. I'm trying now a heated mold with RTMLight
|
|