High temperatures resins

Talk Composites - The Forum for Advanced Composites

Back

High temperatures resins

Author	Message
Slamhammer	S Slamhammer posted 5 Years Ago HOT Topic Details
S Group: Forum Members Posts: 4, Visits: 7	I am looking for information on what resin to use in a high temperature project. It needs to be good up to 400 celcius.
	Reply Like 2
Hanaldo	Hanaldo posted 5 Years Ago Post Details
Group: Forum Members Posts: 2.5K, Visits: 28K	Kind of out of thermoset resin territory, especially for resin infusion. I doubt there's any commercially available pre-pregs that could get up there either, that's getting close to needing ceramic.
	Reply Like 1
Slamhammer	S Slamhammer posted 5 Years Ago Post Details
S Group: Forum Members Posts: 4, Visits: 7	+x Hanaldo - 4/7/2019 2:05:45 PM Kind of out of thermoset resin territory, especially for resin infusion. I doubt there's any commercially available pre-pregs that could get up there either, that's getting close to needing ceramic. Going to be a handgaurd for a rifle. It won't touch the barrle, but it will get close.
	Reply Like 1
scottracing	scottracing posted 5 Years Ago HOT Post Details
Group: Forum Members Posts: 460, Visits: 5.2K	i dont think you will need something that goes to that high temp if its a handguard, you can use insulator materials between the barrel and thecomposite part to allow for that. Theres plenty of coatings around even self adhesive alu tape will work.
	Reply Like 2
Slamhammer	S Slamhammer posted 5 Years Ago Post Details
S Group: Forum Members Posts: 4, Visits: 7	+x scottracing - 4/7/2019 7:22:20 PM i dont think you will need something that goes to that high temp if its a handguard, you can use insulator materials between the barrel and thecomposite part to allow for that. Theres plenty of coatings around even self adhesive alu tape will work. Do you know how much heat a normal resin will tolerate?
	Reply Like 1
scottracing	scottracing posted 5 Years Ago HOT Post Details
Group: Forum Members Posts: 460, Visits: 5.2K	lots of thermosets can be postcured up to 200degrees, where are you located? It would be best speaking to your local reseller and seeing what they stock.
	Reply Like 2
Slamhammer	S Slamhammer posted 5 Years Ago HOT Post Details
S Group: Forum Members Posts: 4, Visits: 7	+x scottracing - 4/7/2019 8:30:15 PM lots of thermosets can be postcured up to 200degrees, where are you located? It would be best speaking to your local reseller and seeing what they stock. Stuttgart. Not sure where would carry carbon fiber materials. I am very uneducated in the area of carbon fiber.
	Reply Like 2