Final resin coats

Talk Composites - The Forum for Advanced Composites

Back

Final resin coats

Author	Message
Warren (Staff)	Warren (Staff) posted 8 Years Ago HOT Post Details
Group: Administrators Posts: 2.5K, Visits: 8.5K	If it is definitely pin holes then as described above, you can literally fill them before lacquering. Brushing into the pinholes is the way. You need the pinholes to fill up with lacquer before you move on. Warren Penalver Easy Composites / Carbon Mods - Technical Support Assistant
	Reply Like 5
Interloper393	Interloper393 posted 8 Years Ago HOT Post Details
Group: Forum Members Posts: 90, Visits: 634	Epoxy resins are prone to pinholes which is what that looks like.. if your laquaring I put the first coat on and use a brush on the pinholes, just put a heavy coat on and brush the pinholes, it should level itself out then apply more coats and.repeat with the brush..worst case you can flat if needed and reclear or polish
	Reply Like 5
easby	easby posted 8 Years Ago HOT Post Details
Group: Forum Members Posts: 6, Visits: 44	+x Warren (Staff) - 12/5/2017 5:39:18 PM It could in theory be some kind of contamination in a resin but unlikely the way most resins are made and bottled. Could be as simple as bits in the air landing on it during the cure. Does sanding them remove them completely? Also when you re-coat and get more of them, is it the same place exactly, (ie pinholes beneath opening up) or different places? (more likely to be fresh dust dropping on it). yes sanding does remove but effectively takes it back to the layer we just put on. Main issue is once part is prepped and ready for 2k lacquer we get the same effect once lacquer goes on. Only real difference is they are more grouped. only option we have is to flatten and re lacquer? This is something that has come on more this year, thought it was temp related but never had problems like this last winter?? could carbon have contaminates in??
	Reply Like 5
Warren (Staff)	Warren (Staff) posted 8 Years Ago HOT Post Details
Group: Administrators Posts: 2.5K, Visits: 8.5K	It could in theory be some kind of contamination in a resin but unlikely the way most resins are made and bottled. Could be as simple as bits in the air landing on it during the cure. Does sanding them remove them completely? Also when you re-coat and get more of them, is it the same place exactly, (ie pinholes beneath opening up) or different places? (more likely to be fresh dust dropping on it). Warren Penalver Easy Composites / Carbon Mods - Technical Support Assistant
	Reply Like 5
easby	easby posted 8 Years Ago HOT Post Details
Group: Forum Members Posts: 6, Visits: 44	+x Warren (Staff) - 12/5/2017 3:42:47 PM it could either be dust in the resin or perhaps more likely, the surface effect of pinholes or small surface voids on lower layers of resin (presume this is skinning?). I did panel wipe parts down 1st. Also if I even if i put another layer down still get them? could it be contamination with the resins? temp is around 18 degree
	Reply Like 5
Warren (Staff)	Warren (Staff) posted 8 Years Ago HOT Post Details
Group: Administrators Posts: 2.5K, Visits: 8.5K	it could either be dust in the resin or perhaps more likely, the surface effect of pinholes or small surface voids on lower layers of resin (presume this is skinning?). Warren Penalver Easy Composites / Carbon Mods - Technical Support Assistant
	Reply Like 4
easby	easby posted 8 Years Ago HOT Post Details
Group: Forum Members Posts: 6, Visits: 44	+x Warren (Staff) - 12/5/2017 3:05:24 PM It's hard to see in that photo. Have you got any thing close up? Not sure if this is any better?? They look like air bubbles but do not go with heat Thanks
	Reply Like 5
Warren (Staff)	Warren (Staff) posted 8 Years Ago HOT Post Details
Group: Administrators Posts: 2.5K, Visits: 8.5K	It's hard to see in that photo. Have you got any thing close up? Warren Penalver Easy Composites / Carbon Mods - Technical Support Assistant
	Reply Like 4
easby	easby posted 8 Years Ago HOT Topic Details
Group: Forum Members Posts: 6, Visits: 44	Hi, can anyone give advice on what is causing these air like bubbles are? any info would help. Thanks
	Reply Like 5