Thanks for the comments.

@ baja patient

Yes, a glass sheet is used as the tool face.

@ Matthieu

Not really, once you add up the cost of the extra resin, lay up time and very slow infusion with the thicker E Glass panel that would be needed to match the 2mm carbon then it kinda starts to become a bit of a false economy. And to be honest once you start to go 3mm or 4mm thicknesses with E Glass then other materials like MDF, DiBond and Perspex would be just a suitable and even more cost effective for a basic coffee table. Yet with the 2mm carbon I have managed to get the table to come in at less than 6KG and loaded an even load of over 130kg on top of it, the carbon is worth the bit extra I think...

That's awesome !!!

 



 


    A $1000 electronic device will always protect a 10 cents fuse

Really good work and nice finnish!

That table is sick!! Fresh and clean work! 

Hi,

So I have had my EC infusion kit for a few months now and have made a couple of sheets of various materials, thicknesses and sizes and now felt that i had learned enough to try and start building stuff with the sheets that I had infused...

So for the first project I have chosen a basic carbon coffee table, a simple box with the aim of learning how to handle and bond the materials and maintain a good finish on the faces and edges as well as having a solid build...

Table size was 900mm x 450mm x 495mm, so in all I needed about 2sqm of sheet material to wrap 5 sides of the box...

The lay up for the base of the table was carbon 200/650/650/200 to give me 1.9mm.

And the top was carbon kevlar 210/carbon 650/650/200 and was 2mm.

The legs are 10mm box section from EC.

All bonding was done with Permabond ET500.

The table...


The Legs and edges...


The joint...


Final finish after a quick wax...




Cheers,

Kev.

Cant wait to see the whole finished thing. Keep us posted

 



 


    A $1000 electronic device will always protect a 10 cents fuse

Quick pick of my cafe racer build still very raw but getting their slowly,as all good projetcs do!

Neat !

 



 


    A $1000 electronic device will always protect a 10 cents fuse

please watch my new video  on youtube

http://www.youtube.com/watch?v=Fj0EB3gTUQo&list=UUPCvlJAIDoqa6Y-dcU88nGw&index=1&feature=plcp

best regards mhd alghoul mhdghoul@hotmail.com youtube channel :atmospherejo link is http://www.youtube.com/user/atmospherejo?ob=0&feature=results_main

My first full size hessian composite sheet

Infusion in progress...



24 hours later...



Finished size 1sqm, waxed and ready for bubble wrap and collection...



Cheers,

Kevin.