Hi,

I now have an almost mint condition MV Agusta F4 750 SR in my garage ... yeahhh ...

Of course it will need a complete CF "workover" starting with all the little bits, and ending up with making a full set of CF fairings.

Now to the Q ... I'm going to build most of it using infusion, and most parts will be painted, so surface quality is not such a big concern..

How many layers of which CF fibre (I plan on at least one layer of Twaron for impact resistance on some parts) will be the best compromise between strenght and weight?

Since I'm not building this to make money, but to improve on my own bike, economy is not the biggest concern ...

I have a large stock (20 m +) of  "Satin Weave" CF 375 gsm ... So I plan to use that for most of the parts.

Any advice will be much appreciated :-)

"Sapere Aude"... Dare to KNOW!

The written word is the only truly efficient vehicle for transmitting a complex concept from mind to mind...

103% of all people do not understand statistics...

Do not adjust our mind, theres a fault in reality :-)

Here is a front mudguard I made earlier, it has had the excess carbon removed and has yet to be polished. I used infusion and three layers of 200g carbon and a strip of core material to reduce torsional flex.