if you do this part from our mold i give you golden medal and reward

Talk Composites - The Forum for Advanced Composites

Back

if you do this part from our mold i give you golden medal and reward

Author	Message
TomDesign	TomDesign posted 12 Years Ago HOT Topic Details
Group: Forum Members Posts: 454, Visits: 2.5K	as thats not real for me to do from one piece by infusion. who do this part i give gold medal and 100 pounds
	Reply Like 3
Reply
TomDesign	TomDesign posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 454, Visits: 2.5K	xaxa the main thing i know a lot who do carbon but i never ever saw in 7 years that someone can do 4 layers perfect pattern twill carbon this piece from mold.
	Reply Like 3

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Threaded View

if you do this part from our mold i give you golden medal and reward

TomDesign - 12 Years Ago

With a good mould made I dont think that is too hard to do.... Probably as easy to do with a good...

morepower - 12 Years Ago

Is the gold medal real gold? If so, whats the weight?

carboncactus - 12 Years Ago

[quote][b]morepower (26/06/2013)[/b][hr]With a good mould made I dont think that is too hard to...

wozza - 12 Years Ago

dont care weight i got mold only without flanges. best is 1 layer 200gr twill and 1 fiberglass

TomDesign - 12 Years Ago

I meant the weight of the gold, if its a kilobar medal, it might be a job worth doing.

carboncactus - 12 Years Ago

xaxa ;) the main thing i know a lot who do carbon but i never ever saw in 7 years that someone can...

TomDesign - 12 Years Ago

Post a photo of the mould. I've infused much trickier things than that, so I can assure you it can...

Hanaldo - 10 Years Ago

yes but my mold without flanges it is double side mold. so do not know how to do that piece.

TomDesign - 10 Years Ago

fro the photos i can guess whar resin used but definitely not epoxy and not polyster im sure 100%...

TomDesign - 10 Years Ago

TomDesign, are you replying on your own photos? :hehe:

matthieutje65 - 10 Years Ago

no but already know what carbon to use and where to cut and to put into mould so part gonna be done...

TomDesign - 10 Years Ago

Can't post a photo of the mould then?

Hanaldo - 10 Years Ago

i try to do photo of mold

TomDesign - 10 Years Ago

one of the mold for same car so you could see...

TomDesign - 10 Years Ago

[URL=http://s1061.photobucket.com/user/TomProcarbonDesign/media/07-09-28_12-48_zpsz6aua6la.jpg.html]...

TomDesign - 10 Years Ago

Reading This Topic

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google