Carbon Fibre Tea Tray

Talk Composites - The Forum for Advanced Composites

Back

Carbon Fibre Tea Tray

Author	Message
TomDesign	TomDesign posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 454, Visits: 2.5K	STILL NO REPLY PLEASE LET ME KNOW WHICH POLYSTER RESIN YOU USE OR ANY LINK THAT NOT NEED CLEAR COAT ONLY POLISHING??
	Reply Like 4
wozza	wozza posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 688, Visits: 5.4K	Any Marine grade Polyester will give good U.V protection. Carbon Copies Ltd
	Reply Like 4
carboncactus	carboncactus posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 243, Visits: 1K	morepower (25/06/2013) PRF will do 5m but I may need a couple of meters too so if we get a 10m roll and split it. It might be perfect..... I have to check how much VTF I have.... Which resin system and Diolen weight would it be? I quoted for 25m of 265g on RF464 (low temp) Edited 12 Years Ago by carboncactus
	Reply Like 3
TomDesign	TomDesign posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 454, Visits: 2.5K	WARREN I NEED MANUFACTURER OR NUMBER OF RESIN SO I ASK PEOPLE HERE AS NO ONE SELL MARINE RESIN!
	Reply Like 4
TomDesign	TomDesign posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 454, Visits: 2.5K	PLEASE NUMBER OF RESIN OR SMTH AS MARINE RESIN NO ONE SELL HERE
	Reply Like 3
morepower	morepower posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 242, Visits: 1.2K	TomDesign (25/06/2013) PLEASE NUMBER OF RESIN OR SMTH AS MARINE RESIN NO ONE SELL HERE Any Lloyds approved resin is fine and almost all polyester resin is UV stable. I use lloyds approved from a number of suppliers like Eastcoast Fibreglass or MBFG.
	Reply Like 4
morepower	morepower posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 242, Visits: 1.2K	carboncactus (25/06/2013) morepower (25/06/2013) PRF will do 5m but I may need a couple of meters too so if we get a 10m roll and split it. It might be perfect..... I have to check how much VTF I have.... Which resin system and Diolen weight would it be? I quoted for 25m of 265g on RF464 (low temp) That is fine.. It is the stuff I used last time with the VTF suface and the SHD backing material and it was compatible with both..
	Reply Like 4
TomDesign	TomDesign posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 454, Visits: 2.5K	please numbers of resin that way i know which is bad and which is uv protected like you say?
	Reply Like 4
carboncactus	carboncactus posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 243, Visits: 1K	Any polyester will protect against UV. When cured, the ester groups create benzene rings which absorb UV light.
	Reply Like 3
TomDesign	TomDesign posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 454, Visits: 2.5K	so cactus you say i wrap part i lay polyster clear and polish and perfect hard finish and uv protected and not appear any white spots from sun and etc?
	Reply Like 4