Noble doors

Author	Message
andygtt	andygtt posted 13 Years Ago HOT Topic Details
Group: Forum Members Posts: 157, Visits: 1.2K	I decided to make some carbon doors for my Noble... unlike the rear clip that was a self made buck to my own design, this time I stripped the original and took moulds of the inner and outer so its effectivelly a replica of the stock part but in carbon.... Also turns out it will be significantly superior as when releasing the moulds from the buck I discovered the standard door edges are made from P40 and filler so the original moulds must have been terrible. For this part I wanted it strong with some crash protection (unlike original) so on the outer skin I used: 200g carbon 650g carbon 3mm soric 210g Carbon/kevlar 210g Carbon Kevlar Inside skin hasnt been pulled yet but will not be as heavy as the outer skin so I plan: 200g carbon 200g carbon 2mm soric 210g Carbon/Kevlar 210g Carbon/Kevlar
	Reply Like 6
Reply
Demlotcrew	Demlotcrew posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 17, Visits: 140	It all depends on the individual, personally I need as little weight as possible (With only 235hp). My doors made from 100% Aramid with 4mm Margard windows and with locking mechanisms and door cards they weigh in at 4.2kg each! (Painting them will add more weight). With regards to Poly windows flexing, you would need to make non pillar-less doors and thermo moulded windows from P4P. Horses for Courses. Andrew
	Reply Like 5

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Threaded View

Noble doors

andygtt - 13 Years Ago

Looking good, nice work :) Must be one heck of a Noble you are building. Regards Warren

wozza - 13 Years Ago

your noble is going to weigh nothing!!

Warren - 13 Years Ago

made the inner door panel... pretty complex shape and I wanted the carbon weave to be perfect so I...

andygtt - 13 Years Ago

I find it refreshingly cool that when youre projects screw up they still come out ok in the end!!...

Warren - 13 Years Ago

fitted to car... [IMG]http://i556.photobucket.com/albums/ss7/andy_gtt/IMG_1211.jpg[/IMG] stock...

andygtt - 13 Years Ago

I know good work when I see it. This is good work! Fred

fgayford - 13 Years Ago

Your work looks very good! But isn't there any thing wrong in that gap between the rear clam and the...

nmicro - 12 Years Ago

a 6kgs saving is not to be sniffed at!! And you now know that you could use less layers and still...

Warren - 13 Years Ago

not sure how it all relates, but my 25 years in auto collision repair tells me the makers have door...

brasco - 12 Years Ago

The noble is a low volume car and here in the UK, low volume cars and kit cars dont have to apply...

Warren - 12 Years Ago

oh..wjhat is low volume? :D

brasco - 12 Years Ago

Isn't this more about selfprotection than regulations? :D but that doesn't take away that this is...

matthieutje65 - 12 Years Ago

[quote][b]matthieutje65 (21/01/2013)[/b][hr]Isn't this more about selfprotection than regulations?...

brasco - 12 Years Ago

[quote][b]matthieutje65 (21/01/2013)[/b][hr]Isn't this more about selfprotection than regulations?...

andygtt - 12 Years Ago

I have kevlar on the inside of the door to add crash protection and prevent the outer door...

andygtt - 12 Years Ago

Don't need door bars when you have a cage :D Andy, you're my hero.

Jut - 12 Years Ago

cage rules man !! :D

brasco - 12 Years Ago

[quote][b]Jut (23/01/2013)[/b][hr]Don't need door bars when you have a cage :D Andy, you're my...

andygtt - 12 Years Ago

Very very nice!!!!!!!!!!! :) :)

wozza - 12 Years Ago

Most people would be happy with that as a final finish let alone a primer finish! Something that...

Warren (Staff) - 12 Years Ago

The Soric, where do you source that? Fab work by the way. Any reason you used that instead of the...

Tristan H - 12 Years Ago

[quote][b]Tristan H (06/03/2013)[/b][hr]The Soric, where do you source that? Fab work by the way....

andygtt - 12 Years Ago

I think they may be air intakes/ ducts? Warren

wozza - 12 Years Ago

I take it then the standard door latches and handles will be a straight fit onto the carbon doors...

pk_090 - 12 Years Ago

clam isn't properly fitted or aligned, its just bolted on so to speak.... and they are air intakes...

andygtt - 12 Years Ago

Looks really nice! I have a question, why would you use glass in the doors over polycarbonate? And...

Demlotcrew - 12 Years Ago

[quote][b]Demlotcrew (23/05/2013)[/b][hr]Looks really nice! I have a question, why would you use...

andygtt - 12 Years Ago

To be fair with the amount of weight saving on the car, keeping glass windows as a nod to...

Warren (Staff) - 12 Years Ago

It all depends on the individual, personally I need as little weight as possible (With only 235hp)....

Demlotcrew - 12 Years Ago

Nice car... I can see why you would want poly windows for your car, but Im trying to make mine a...

andygtt - 12 Years Ago

awesome looking work here guys.

mikey_d - 12 Years Ago

andy, you're my hero!

WilliamsHPF - 12 Years Ago

Fantastic job!

CarbonMike - 12 Years Ago

That's the most rewarding, making your own stuff for your ride!!! Well done!!!

NikCFC - 12 Years Ago

Does look very very sexy! :)

Demlotcrew - 12 Years Ago

Reading This Topic

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google

Noble doors

Noble doors

Merge Selected

Threaded View

Similar Topics

Reading This Topic

Login

Explore

Messages

Mentions

Search