I decided to make some carbon doors for my Noble... unlike the rear clip that was a self made buck to my own design, this time I stripped the original and took moulds of the inner and outer so its effectivelly a replica of the stock part but in carbon.... 

Looking good, nice work 

your noble is going to weigh nothing!!

I find it refreshingly cool that when youre projects screw up they still come out ok in the end!! Wish mine could come out the same.

a 6kgs saving is not to be sniffed at!!

And you now know that you could use less layers and still have a door at least as stiff as the original. so you could potentially make yourself some superlight ones then sell on the heavier ones.

I know good work when I see it. This is good work!

Fred

not sure how it all relates, but my 25 years in auto collision repair tells me the makers have door intrusion beams. they are mandated for safety reasons and thats all fine. many are very lightly made and i guess they work as advertised LOL
my idea is-- if you had any inclination to add them, you could and just bond it in. not sure how CF does in a crash, SMC (sheet molded compounds) shred and splinter upon impact.
 when CF is impacted i bet it is like a ba-zillion (yes an actual scientific notation term   ) knives and razor blades scattered in all directions. extraction, self removal even from a car that is damaged with CF has many cut and stab hazards. keep some good gloves handy
nice doors btw

CarbonFiberCreations

The noble is a low volume car and here in the UK, low volume cars and kit cars dont have to apply with the same EU type approval as mass produced cars.