Killed my Dremel

Talk Composites - The Forum for Advanced Composites

Back

Killed my Dremel

Author	Message
RBailey	RBailey posted 11 Years Ago HOT Topic Details
Group: Forum Members Posts: 4, Visits: 21	Hi All, I guess I work my little dremel hard but it just died the other day I have often wondered if the dust from working composites is bad for them and if it the cause of death in this case ? (I wonder if I should get a new model with flexible drive to keep the motor more out of the dust ?) Am I right, any comments, suggestions etc ? Cheers, Richard B. Tags Dremel
	Reply Like 2

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Threaded View

Killed my Dremel

RBailey - 11 Years Ago

[quote][b]RBailey (22/01/2013)[/b][hr]Hi All, I guess I work my little dremel hard but it just...

Daz - 11 Years Ago

Daz, as you said, it was new and full of dust and that killed it. Carbon dust is highly...

baja_patient - 11 Years Ago

Always use the flexible shaft when cutting carbon and polyester parts and keep the main unit higher...

NikCFC - 11 Years Ago

I have a flexi shaft now for the new one.

Daz - 11 Years Ago

As Already said, Carbon dust is a killer. Our Dremel is kept high up with a long flexible shaft to...

Warren (Staff) - 11 Years Ago

I use a dremel and a saw fein. I always use vacuum cleaner near the blade

_GABBER - 11 Years Ago

Probably a good idea to blow out your dremel with compressed air every once in a while. Fred

fgayford - 11 Years Ago

[quote][b]fgayford (25/01/2013)[/b][hr]Probably a good idea to blow out your dremel with compressed...

fgayford - 10 Years Ago

I'd also suggest to blow out the dust but keeping in mind that you have to remove the dust away from...

NikCFC - 11 Years Ago

A compressor and air tools are not really expensive compared to conventional mainsdremel and alot...

pk_090 - 11 Years Ago

mmm probably you should remove the silicone from the gaps ASAP because the motor of the vac cleaner...

NikCFC - 11 Years Ago

Ive rigged up aseparateinlet pipe and fan to cool the motor out that sucks in air from a safe area...

pk_090 - 11 Years Ago

I know this is a very old topic, but just thought I'd post seeing as I was reading through......

Hanaldo - 10 Years Ago

I swapped the fuse for a 1 amp fuse.. Too low to fry the dremel but high enough to let it work.. I...

morepower - 10 Years Ago

Subscribing... I burnt mine up yesterday. I let it cool for the night. Hopefully it will start again...

wildcard - 10 Years Ago

Reading This Topic

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google

Killed my Dremel

Killed my Dremel

Merge Selected

Threaded View

Similar Topics

Reading This Topic

Login

Explore

Messages

Mentions

Search