Clear coat advice.

Talk Composites - The Forum for Advanced Composites

Back

Clear coat advice.

Author	Message
carbon man	carbon man posted 5 Years Ago HOT Topic Details
Group: Awaiting Activation Posts: 86, Visits: 1.2K	Successfuly made some pre preg. Wanting to clear coat. Untill I get set up I'm using rattle can acrylic. I key in with 800 grit but it drys showing all the 800 scratches . Would this still happen with proper mixed 2k clear coat? Thanks
	Reply Like 4
Replies
Hanaldo	Hanaldo posted 5 Years Ago HOT Post Details
Group: Forum Members Posts: 2.5K, Visits: 28K	Depends if you use a high solids clear or a medium solids clear. For medium solids you want to prep with a gold scuffing pad rather than sand paper. For high solids, you can prep with 600 grit.
	Reply Like 4
carbon man	carbon man posted 5 Years Ago HOT Post Details
Group: Awaiting Activation Posts: 86, Visits: 1.2K	+x Hanaldo - 7/4/2020 3:12:47 PM Depends if you use a high solids clear or a medium solids clear. For medium solids you want to prep with a gold scuffing pad rather than sand paper. For high solids, you can prep with 600 grit. What's the difference? Mainly spraying small parts of that makes a difference
	Reply Like 3
beliblisk	b beliblisk posted 5 Years Ago HOT Post Details
b Group: Forum Members Posts: 53, Visits: 2.8K	+x carbon man - 7/4/2020 4:36:03 PM +x Hanaldo - 7/4/2020 3:12:47 PM Depends if you use a high solids clear or a medium solids clear. For medium solids you want to prep with a gold scuffing pad rather than sand paper. For high solids, you can prep with 600 grit. What's the difference? Mainly spraying small parts of that makes a difference Like name suggests there is higher solids (HS) content. It is also called scratch resistant clear... i use ultra high solids (UHS) clear to coat CF and can even get away with 400 grit but most of the time i finish at 800. All offcourse 2k. Edited 5 Years Ago by beliblisk
	Reply Like 3
carbon man	carbon man posted 5 Years Ago HOT Post Details
Group: Awaiting Activation Posts: 86, Visits: 1.2K	+x beliblisk - 7/4/2020 5:42:59 PM +x carbon man - 7/4/2020 4:36:03 PM +x Hanaldo - 7/4/2020 3:12:47 PM Depends if you use a high solids clear or a medium solids clear. For medium solids you want to prep with a gold scuffing pad rather than sand paper. For high solids, you can prep with 600 grit. What's the difference? Mainly spraying small parts of that makes a difference Like name suggests there is higher solids (HS) content. It is also called scratch resistant clear... i use ultra high solids (UHS) clear to coat CF and can even get away with 400 grit but most of the time i finish at 800. All offcourse 2k. Nice thanks. Can you also point me in the right direction for compressor and spray gun. Also what brand of clear coat do you use. Is it acrylic 2k?
	Reply Like 4
beliblisk	b beliblisk posted 5 Years Ago HOT Post Details
b Group: Forum Members Posts: 53, Visits: 2.8K	Its PU UHS clear....... its our local manufacturer but i am sure you can get it near you in specialized store for car paints & bodyshop equipment. Ask for advice on spray gun and compressor there as well. I dont know exactly wgat brand of gun i am using (one small and one big) but can make pics if needed on monday Edited 5 Years Ago by beliblisk
	Reply Like 4