Aprilia MXV 450 : Motocross full carbon project completed.

Talk Composites - The Forum for Advanced Composites

Back

Aprilia MXV 450 : Motocross full carbon project completed.

Author	Message
Thomb	Thomb posted 8 Years Ago HOT Post Details
Group: Forum Members Posts: 23, Visits: 656	Well done mate, really looks nice Edited 8 Years Ago by Thomb
	Reply Like 4
Thanasis	Thanasis posted 8 Years Ago HOT Post Details
Group: Forum Members Posts: 36, Visits: 234	Warren (Staff) (22/02/2017) Nice video! You have certainly made some impressive composite parts! Thank you! It all started with your tutorial videos, which are so fantastic and so helpful. I have watched them many times : )
	Reply Like 4
Warren (Staff)	Warren (Staff) posted 8 Years Ago HOT Post Details
Group: Administrators Posts: 2.5K, Visits: 8.5K	Nice video! You have certainly made some impressive composite parts! Warren Penalver Easy Composites / Carbon Mods - Technical Support Assistant
	Reply Like 4
Thanasis	Thanasis posted 8 Years Ago HOT Post Details
Group: Forum Members Posts: 36, Visits: 234	Thomb (16/02/2017) please make some pics! always nice to see. I have a better idea, here is a video of the recent parts : enjoy!
	Reply Like 4
Thomb	Thomb posted 8 Years Ago HOT Post Details
Group: Forum Members Posts: 23, Visits: 656	please make some pics! always nice to see.
	Reply Like 3
Thanasis	Thanasis posted 8 Years Ago HOT Post Details
Group: Forum Members Posts: 36, Visits: 234	Shaneer22 (06/02/2017) How it's going. I have kept the subframe project on hold, because the last month I have spend all of my free time in making carbon parts for another MXV bike, since the moulds were ready to go. But I will be back on this for sure....
	Reply Like 4
Shaneer22	Shaneer22 posted 8 Years Ago HOT Post Details
Group: Forum Members Posts: 156, Visits: 14K	How it's going.
	Reply Like 4
Thanasis	Thanasis posted 8 Years Ago HOT Post Details
Group: Forum Members Posts: 36, Visits: 234	Thomb (28/01/2017) looks great, any pics of how you make the mould edges of the parts with the plastic? It is simple: all the barriers of the moulds are made with 'polypropylene fluted signboard' that is glued behind the plastic parts with hot glue. I have keep only this photo : Then you can joint the pieces with release tape (green tape) and the voids with filleting wax (yellow material).
	Reply Like 3
Thomb	Thomb posted 8 Years Ago HOT Post Details
Group: Forum Members Posts: 23, Visits: 656	looks great, any pics of how you make the mould edges of the parts with the plastic?
	Reply Like 4
Thanasis	Thanasis posted 8 Years Ago HOT Post Details
Group: Forum Members Posts: 36, Visits: 234	So I found finally some time to finish the mould. It is ready to go!
	Reply Like 4