Talk Composites - The Forum for Advanced Composites
Back
Login
Register
Login
Register
Home
»
Advanced Composites Forum
»
Resin Infusion
»
"Print through" residue left on mold surface after demold.
"Print through" residue left on mold surface after demold.
Post Reply
Like
6
Prev
1
2
Jump To Page
"Print through" residue left on mold surface after demold.
View
Flat Ascending
Flat Descending
Threaded
Options
Subscribe to topic
Print This Topic
Goto Topics Forum
Author
Message
seense
seense
posted 9 Years Ago
ANSWER
HOT
Post Details
Group: Forum Members
Posts: 10,
Visits: 138
update: Apparently the easy lease tin was already a bit old when I got it.
. So when I got it I needed 12 coats. Last week I needed 20 coats of easy lease and still masking tape didn't come off easily. I decided to try a new 100ml batch of easy lease. Now I did 6 coats and after the second coat it felt already a bit silky. Masking tape releases very easy after 6 coats. Too bad for the 500ml bottle. I always was very careful with the tin closing it immediately after wetting the lint free cloth and storing it in the ziplock bag it came with.
Reply
Like
3
GO
Merge Selected
Merge into selected topic...
Merge into merge target...
Merge into a specific topic ID...
Open Merge
Post Reply
Like
6
Prev
1
2
Jump To Page
Similar Topics
Post Quoted Reply
Reading This Topic
Login
Login
Remember Me
Reset Password
Resend Validation Email
Login
Facebook
Google
Explore
Messages
Mentions
Search