Prepreg + Nomex honeycomb

Author	Message
Carbonnewbie	Carbonnewbie posted 9 Years Ago HOT Topic Details
Group: Forum Members Posts: 3, Visits: 55	Hello! I am planning to make carbon fiber + nomex honey comb sandwich sheets, about 1.5 m2 pieces. The sheets are not 100% straight, but no radical shapes neither included The skins would be app 220g/m2 carbon, and inside 4,8mm Nomex, 5mm thick. What are my possibilities? I red about dipping the honeycomb in epoxy. Also about the adhesive films etc. Even some sources say, that I can do everything in one pass, without glues (when using prepreg)..... Only the surface facing to the mold has to be perfect, other side does not matter at all. Carbonnewbie Tags honeycomb core nomex Prepreg Edited 9 Years Ago by Carbonnewbie
	Reply Like 5
Reply
Carbonnewbie	Carbonnewbie posted 9 Years Ago HOT Post Details
Group: Forum Members Posts: 3, Visits: 55	Thanks for replies! Would this make sense: Making the first skin by resin infusion, with peel ply. After curing adding an adhesive film on the cured skin, followed by honeycomb, and on top of that a Prepreg (for instance mtm 28 ) and then vacuumbagging the whole thing and curing in the oven?
	Reply Like 5

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Carbonnewbie - 9 Years Ago

carbonfibreworks - 9 Years Ago

Dravis - 9 Years Ago

f1rob - 9 Years Ago

Carbonnewbie - 9 Years Ago

f1rob - 9 Years Ago

f1rob - 9 Years Ago

hello! just to make sure that the surface of the skin would be superb.

Carbonnewbie - 9 Years Ago

f1rob - 9 Years Ago

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google