High temp epoxy easycomposites


High temp epoxy easycomposites
View
Options
Author
Message
thanasiss3
thanasiss3
thanasiss3
posted 10 Years Ago HOT
Supreme Being (116 reputation)Supreme Being (116 reputation)Supreme Being (116 reputation)Supreme Being (116 reputation)Supreme Being (116 reputation)Supreme Being (116 reputation)Supreme Being (116 reputation)Supreme Being (116 reputation)Supreme Being (116 reputation)
Group: Forum Members
Posts: 18, Visits: 348
Hello everyone,anybody knows if the easycompoaites very high temp epoxy can partial post cured at 60-70c?what will be the Tg?
Reply Like 3
GO

Merge Selected

Merge into selected topic...



Merge into merge target...



Merge into a specific topic ID...



Submit

Threaded View
Threaded View
High temp epoxy easycomposites
thanasiss3 - 10 Years Ago
     you can find everything you need in the technical data sheet of every product on the product page :)...
matthieutje65 - 10 Years Ago
     I found the tds sheet,they say you can partial post cure the system but i ask if someone know or...
thanasiss3 - 10 Years Ago
     I have postcured the EC high Temp resin at 90 -100 deg on several occasions .. when left for some...
Dravis - 10 Years Ago
             With this epoxy i have the tds so i can follow this and not try and error like the other i used!
thanasiss3 - 10 Years Ago
     As said a good rule of thumb is the resin will have a TG around the temperature you postcured it to,...
Warren (Staff) - 10 Years Ago

Similar Topics

Post Quoted Reply
Reading This Topic

Powered by InstantForum 2017-0 Final © 2025
Execution: 0.000. 3 queries. Compression Enabled.
Explore
Messages
Mentions
Search