hello from sussex


hello from sussex
View
Options
Author
Message
carbonloony
carbonloony
carbonloony
posted 11 Years Ago HOT
Junior Member (5 reputation)Junior Member (5 reputation)Junior Member (5 reputation)Junior Member (5 reputation)Junior Member (5 reputation)Junior Member (5 reputation)Junior Member (5 reputation)Junior Member (5 reputation)Junior Member (5 reputation)
Group: Forum Members
Posts: 1, Visits: 4
Hiya 
Well this aint easy is it 
hoping for loads of help 
just a quickie, why dus the epoxy resin go cloudy ????

ta  

owen 
Reply Like 2
Reply
spec-naz
spec-naz
spec-naz
posted 11 Years Ago HOT
Forum Member (25 reputation)Forum Member (25 reputation)Forum Member (25 reputation)Forum Member (25 reputation)Forum Member (25 reputation)Forum Member (25 reputation)Forum Member (25 reputation)Forum Member (25 reputation)Forum Member (25 reputation)
Group: Forum Members
Posts: 5, Visits: 24
Do you have the same cloudyness like here?
http://www.talkcomposites.com/Uploads/Images/4bb91815-4e71-4214-a513-ba80.jpg
Reply Like 2
GO

Merge Selected

Merge into selected topic...



Merge into merge target...



Merge into a specific topic ID...



Submit

Threaded View
Threaded View
hello from sussex
carbonloony - 11 Years Ago
     It normally goes cloudy if it has not fully cured and moisture gets into the laminate. Hard does not...
panda - 11 Years Ago
     High humidity when working with the uncured resin .. and while hardening, also often causes "amine...
Dravis - 11 Years Ago
     Do you have the same cloudyness like here?
spec-naz - 11 Years Ago
     atrodo kad cia maisas pavirsiu suvele. plius daug kitko reik realiau pamatyt
TomDesign - 11 Years Ago
             It's not a bag. It is mould side, so it was touching just wax and release agent PVA. But after post...
spec-naz - 11 Years Ago

Similar Topics

Post Quoted Reply
Reading This Topic

Powered by InstantForum 2017-0 Final © 2025
Execution: 0.000. 2 queries. Compression Enabled.
Explore
Messages
Mentions
Search