hello again,how many wraps are needed to make a repair using the pole kit ? also what do you use to clean up with residue etc ? also i noticed the kit contents list a pro finish carbon cloth but mine has the plain cloth that falls apart ! please advise many thanks

You have already started two threads about the repair of your pole. Why start a third?????

Unfortunately i can't combine the threads.

2 to 3 wraps is generally enough but it depends on the wall thickness and severety of damage.  The top thin tubes usually 2 is sufficient maybe 3 if its a complete break.  The thicker sections may need more layers to replace the strength but generally tend to break less.

If your kit has the wrong cloth in it then you can either send back the roll with a note including order number and we will ensure the right material is sent, or give us a call or email and we can fix it that way.  User accounts on the forum are not linked to customer accounts on the webshop so I cannot see your order from here.

Warren Penalver
Easy Composites / Carbon Mods - Technical Support Assistant

thanks warren,and what do you use to clean off excess resin etc ? thanks

Just use a lint free cloth as the shrink tape goes on and is shrunk.  You will get excess squeezed out the ends and along the tape. Wiping it off will aid removal of the tape once the repair has cured.

Warren Penalver
Easy Composites / Carbon Mods - Technical Support Assistant