|
Group: Forum Members
Posts: 680,
Visits: 1.9K
|
Yes, you can overcome any fish-eye problems by using PVA but then you have PVA problems - i.e. your parts will have a dull matt finish which will need to be polished off and can sometimes actually take quite a bit of polishing (not just a quick buff). I guess because we come from a commercial manufacturing stand point we always look for processes that reduce labour and so chemical release agents which leave a mirror finish gloss straight out of the mould are preferable to processes that require subsequent work.
I'll let you know when the gel coat is in.
Best regards, Matt
Matt Statham
Easy Composites / Carbon Mods - Technical Sales
|