AB Performance Sabre Racer - Complete Bodywork in Carbon

Author	Message
Ragged99	Ragged99 posted 11 Years Ago HOT Topic Details
Group: Forum Members Posts: 7, Visits: 106	Hi Guys, I thought I'd pop up and show you what my mate Tim and I are doing with the Easy Composites systems in our garages. We're what Enzo Ferrari called "Garagistas" in that we both own AB Performance Sabre race cars, and we build, modify, and prepare them to run in a race series called RGB with the 750 motor Club. In short we're clubman racers and we like building stuff. Our cars are powered by bike engines, and we aren't allowed wings. so we need to generate aero efficiency from the main body of the car. Tim is in mid build of his new Sabre and wanted non standard bodywork to try and improve the aero efficiency, and I wanted different bodywork on my year old Sabre as the car is currently too big to fit in my garage without partially disassembling it, which is a right pain when you arrive home at midnight after a weekends racing. Also I'm a big lad and ultra lightweight carbon bodywork will help me get down to the minimum weight limit for the car and driver. So we basically decided to build our own bodywork from scratch. I'd done some small scale fibreglass, buck and mould building in the past on a former car, and we were pretty impressed with the resin infusion process so decided to give the Easy Composites system a try. We even ran a test infusion process on my glass coffee table top ;-) to make some flat carbon panels. Although we've never tackled anything of this size, we're doing the full spectrum of build a buck, surface it, then make a mould, them carbon resin infused parts. So for the last couple of months we've been building a buck around Tim's partially complete chassis. Well in fact Tim has 90% of the work and I'm chipping in at weekends. The buck has been built from timber, 3mm mdf board which is nicely flexible for simple curves, filler and foam. and we're now at the pattern coat primer stage. We've learned a lot along the way, but basically we've followed the video tutorials and have just scaled up the processes. Full details are on Tim's website at www.hoverd.org Details of my racing are at www.rgbracer.com.. and the main AB performance website is www.abperformance.co.uk. But to whet your appetite here's a picture of the buck in pattern coat. Cost to date in materials for the buck, pattern coat, foam etc is about 500 quid, although I've just spent about 600-800 on Unimould materials + CSM for the mould making stage. Cheers Adrian Moore Edited 11 Years Ago by Ragged99
	Reply Like 7
Reply
Teem	Teem posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 6, Visits: 19	Warren (Staff) (03/01/2014) One thing i will say is plan your mould flanges and mould split lines very carefully to ensure no mechanical lock and also easy demoulding and mould assembly. You have to make your moulds such that you can assemble it and it holds the shape accurately. You can use wooden battens on the reverse to further stiffen the moulds up. Warren, Thanks. It has to be said that we've probably spent more time talking about split lines and how to made flanges on the mouldings that locate them against each other than just about anything else. We now think we've got the basic ideas sorted out. However, time will tell! One issue, to be honest, is that we've built the buck on the car chassis itself (it doesn't actually run yet but all the running gear/wiring/cooling/etc is there). You can see the chassis/suspension/engine in the photos on my website. As such, it's going to make fitting fences to the mould a bit tricky; there's a particular issue around the roll-hoop support diagonals that we haven't entirely resolved yet. (Well, I have but I've failed to convince Adrian as yet! ) Tim
	Reply Like 5

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Threaded View

AB Performance Sabre Racer - Complete Bodywork in Carbon

Ragged99 - 11 Years Ago

Oh I'm excited about this project. I will definitely be checking on the progress.

wildcard - 11 Years Ago

Looks like a fun project! One thing i will say is plan your mould flanges and mould split lines...

Warren (Staff) - 11 Years Ago

Hi Adrian, It's great to see another ambitious project that looks like it might be well documented...

Matt (Staff) - 11 Years Ago

[quote][b]Matt (Staff) (03/01/2014)[/b][hr] Pattern is looking good at this stage; Pattern-Coat...

Teem - 11 Years Ago

[quote][b]Warren (Staff) (03/01/2014)[/b][hr] One thing i will say is plan your mould flanges and...

Teem - 11 Years Ago

OUTSTANDING! I'll look forward to seeing this one take shape.

FLD - 11 Years Ago

I'll be watching with interest - I really like the Sabre and one day might have the time, money and...

Munkee - 11 Years Ago

Hi Tim, To solve your flange issue, in an ideal world I'd say lift the plug off the body (if...

Warren (Staff) - 11 Years Ago

Warren, Thanks. However, the plug relies rather completely on the chassis for support and, as...

Teem - 11 Years Ago

I thought you might like to see the moulds that resulted from all this: and the whole lot:...

Teem - 11 Years Ago

This is looking great, can't wait to see it progress. I'd like to give you a little input as I've...

andygtt - 11 Years Ago

Thanks for the advice all. We're pretty nervous about the whole fence location business so input is...

Ragged99 - 11 Years Ago

great looking project, watching with interest :cool:

Toffee - 11 Years Ago

Hi All, I thought I'd give you an update on our progress, we've had a few problems along the way but...

Ragged99 - 11 Years Ago

Very nice work :cool:

Toffee - 11 Years Ago

Tim's put up a new blog post with a little more detail Http://www.Hoverd.org/Tim/

Ragged99 - 11 Years Ago

Looks great! Can't wait to see the finished car!

wildcard - 11 Years Ago

Well here's yet another update. With the moulds complete, and centre sections previously moulded...

Ragged99 - 11 Years Ago

Very nice. I think working with that much csm and polyester would give me a breakdown, hate it with...

Hanaldo - 11 Years Ago

Looks great.

wildcard - 11 Years Ago

Nice work, is it going on a G1 or a G2 ? Warren

wozza - 11 Years Ago

[quote][b]wozza (08/04/2014)[/b][hr]Nice work, is it going on a G1 or a G2 ? Warren[/quote] Both....

Teem - 11 Years Ago

[quote][b]Teem (09/04/2014)[/b][hr][quote][b]wozza (08/04/2014)[/b][hr]Nice work, is it going on a...

wozza - 11 Years Ago

Tim Has a G2 car and mine is a G1. No we're not linked to AB, except Andy Bates is a mate, and...

Ragged99 - 11 Years Ago

I should say the complete set of moulds is now complete for the bodywork created so far, including...

Ragged99 - 11 Years Ago

this is loosely how i do the return edges on my parts... if the areas are hard to get to when the...

andygtt - 11 Years Ago

Reading This Topic

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google