Carbon stacking help

Author	Message
Jdmleesy	Jdmleesy posted 12 Years Ago HOT Topic Details
Group: Forum Members Posts: 39, Visits: 380	I'm getting parts 2gether to start making a sunroof bung for my car but I'm just struggling for what way to stack the materials because costs are low after buying all the equipment involed I want the part to look oem as possible so I can have it attached to the mechanism if I choose or just use it as a bung. Iv seen some people using 200g carbon then 3/4 layers of 200/300g woven glass would this be stiff enough like this? If not what would be good enough amount if layers that's not 2 expensive? The part is 20"x30" and there will be a front and back mould that will need bonding together. Thanks for any help Daz
	Reply Like 3
Reply
Dravis	Dravis posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 592, Visits: 1.9K	I would go for 5 layers on this part.. Soric in the middle, then E-Glass, then outer layer of CF. No print-through from the Soric, nice and stiff. Edges made with either enough layers of CF to match the Soric, or CF tape. "Sapere Aude"... Dare to KNOW! The written word is the only truly efficient vehicle for transmitting a complex concept from mind to mind... 103% of all people do not understand statistics... Do not adjust our mind, theres a fault in reality :-)
	Reply Like 2

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Jdmleesy - 12 Years Ago

Thanks for the help people

Jdmleesy - 12 Years Ago

dbcrx - 12 Years Ago

Jdmleesy - 12 Years Ago

Dravis - 12 Years Ago

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google