Intake Duct

Talk Composites - The Forum for Advanced Composites

Back

Intake Duct

Author	Message
wozza	wozza posted 12 Years Ago HOT Topic Details
Group: Forum Members Posts: 688, Visits: 5.4K	Another weekend spent shaping foam and sanding body filler!! A good few coats of high build primer. A flat and polish tomorrow and should be able to take a mould from it. Warren Carbon Copies Ltd Edited 12 Years Ago by wozza
	Reply Like 2
Replies
wozza	wozza posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 688, Visits: 5.4K	Thanks for the comments chaps. I managed to pull a GRP test piece today just to prove the mould. The duct is for a customer who wanted a specific size Intake Duct. 300mm x 220mm to take 75mm Ducting. Looks like I will be ordering some Pre Preg don't fancy trying to infuse it. Warren Carbon Copies Ltd
	Reply Like 3
carbonfibreworks	carbonfibreworks posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 292, Visits: 4.5K	wozza (25/03/2013) Thanks for the comments chaps. I managed to pull a GRP test piece today just to prove the mould. The duct is for a customer who wanted a specific size Intake Duct. 300mm x 220mm to take 75mm Ducting. Looks like I will be ordering some Pre Preg don't fancy trying to infuse it. Warren Quality work Warren.
	Reply Like 3

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Threaded View

Intake Duct

wozza - 12 Years Ago

Looking good! Your own variation of the NACA duct I guess.

Warren (Staff) - 12 Years Ago

It looks good so far. That part looks like the duct used on NASCAR windows.

tauruck - 12 Years Ago

Thanks for the comments chaps. I managed to pull a GRP test piece today just to prove the mould. The...

wozza - 12 Years Ago

[quote][b]wozza (25/03/2013)[/b][hr]Thanks for the comments chaps. I managed to pull a GRP test...

carbonfibreworks - 12 Years Ago

Managed to get the plug done for the top section of the Duct which will house the cone filter. The...

wozza - 12 Years Ago

Managed to get the prototype duct finished.

wozza - 12 Years Ago

That looks excellent , did you use infusion Warren ? Chris

carbonfibreworks - 12 Years Ago

Hi Wozza Looks nice. How did you do the graphics exactly? Thanks Fred

fgayford - 12 Years Ago

Hi Chris, this one was wet laid but future ones will be done by Infusion. I don't do much wet lay...

wozza - 12 Years Ago

Hi Fred, I have a basic cheap Chinese Vinyl Cutter/Plotter which I use to cut out the text....

wozza - 12 Years Ago

Thanks Warren Graphics well done, add so much to the look of a piece. Fred

fgayford - 12 Years Ago

Opinions please! I wasn't happy with the "edge" on the front of the Intake so I decided to make up...

wozza - 12 Years Ago

[quote][b]wozza (10/04/2013)[/b][hr]Opinions please! I wasn't happy with the "edge" on the front of...

carbonfibreworks - 12 Years Ago

Hi Chris how did your day spannering go ? The simulation shows a slight increase in air flow with...

wozza - 12 Years Ago

We had a great day at Mallory, the two bikes had minor problems but we managed to take care of them...

carbonfibreworks - 12 Years Ago

Looks good! I did notice however, the course surface on the inside where the air will be flowing. I...

baja_patient - 12 Years Ago

Thanks for the feedback. I think it may be the picture quality. :) The inside has had a coat of...

wozza - 12 Years Ago

Reading This Topic

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google

Intake Duct

Intake Duct

Merge Selected

Threaded View

Similar Topics

Reading This Topic

Login

Explore

Messages

Mentions

Search