+x Classicarbon - 9/24/2019 3:22:03 PMOk.made my first ever part (sheet) from CF.I'm not concern about small imperfections.on the surface cos finally still can be sanded down and 2k clear coat. I more worry about how to remove trapped air. Is it degassing ? Should I vacuum during infiusion till air stop coming out?Or anything else?
+x Lester Populaire - 9/24/2019 4:25:46 PM+x Classicarbon - 9/24/2019 3:22:03 PMOk.made my first ever part (sheet) from CF.I'm not concern about small imperfections.on the surface cos finally still can be sanded down and 2k clear coat. I more worry about how to remove trapped air. Is it degassing ? Should I vacuum during infiusion till air stop coming out?Or anything else?Cut the flow media a centimeter short of the carbon to avoid the resin skimming over the top of the fabric. Already thought of that yesterday when i saw your other post...
+x Classicarbon - 9/24/2019 4:30:59 PM+x Lester Populaire - 9/24/2019 4:25:46 PM+x Classicarbon - 9/24/2019 3:22:03 PMOk.made my first ever part (sheet) from CF.I'm not concern about small imperfections.on the surface cos finally still can be sanded down and 2k clear coat. I more worry about how to remove trapped air. Is it degassing ? Should I vacuum during infiusion till air stop coming out?Or anything else?Cut the flow media a centimeter short of the carbon to avoid the resin skimming over the top of the fabric. Already thought of that yesterday when i saw your other post...You mean mesh?