Talk Composites - The Forum for Advanced Composites
Back
Login
Register
Login
Register
Home
»
Advanced Composites Forum
»
General Composites Discussion
»
Bonding PMMA plastic to cured Carbon fiber
Bonding PMMA plastic to cured Carbon fiber
Post Reply
Like
3
Bonding PMMA plastic to cured Carbon fiber
View
Flat Ascending
Flat Descending
Threaded
Options
Subscribe to topic
Print This Topic
Goto Topics Forum
Author
Message
DavidMerch
D
DavidMerch
posted 6 Years Ago
ANSWER
HOT
Topic Details
D
Group: Forum Members
Posts: 2,
Visits: 17
Hello
I would like to make a sandwich structure using two of your cured Carbon fiber panels 1.5mm thick. In the middle I plan to bond 10mm thick PMMA plastic, what glue do you suggest? Any surface preparation?
Can you also advise if other laser cut plastic are better for this purpose? The structure will be subjected to low loads.
Thanks
Reply
Like
3
Reply
Hanaldo
Hanaldo
posted 6 Years Ago
ANSWER
HOT
Post Details
Group: Forum Members
Posts: 2.5K,
Visits: 28K
Thoroughly sand the surface with 80 grit sandpaper, then clean with isopropyl alcohol.
Reply
Like
3
GO
Merge Selected
Merge into selected topic...
Merge into merge target...
Merge into a specific topic ID...
Open Merge
Threaded View
Threaded View
Bonding PMMA plastic to cured Carbon fiber
DavidMerch
-
6 Years Ago
For bonding the sheet our ET515 Semi Flexible 15min Professional Epoxy Adhesive is a great adhesive. It will get a good grip to the surface and provide a good bond strength. Key the surface and clea...
Warren (Staff)
-
6 Years Ago
Thanks, what do you mean by "key the surface"?
DavidMerch
-
6 Years Ago
Thoroughly sand the surface with 80 grit sandpaper, then clean with isopropyl alcohol.
Hanaldo
-
6 Years Ago
Post Reply
Like
3
Similar Topics
Post Quoted Reply
Reading This Topic
Login
Login
Remember Me
Reset Password
Resend Validation Email
Login
Facebook
Google
Explore
Messages
Mentions
Search