|
Group: Forum Members
Posts: 12,
Visits: 100
|
Hi all,
Just a quick one.
I infused some small items recently, approx 300mm x 150mm with:
650g 2 twil (mould surface)
3 layers of 200 unidirectional
Then top layer of 450 2
I then added peel ply and infusion mesh.
The top surface just about wetted out, but the mould surface didn’t wet at all.
Is there a particular problem I’m having or is there perhaps a way to slow the resin flow to allow it to saturate all layers?
Many thanks,
Bill
|