Gloves sticking to prepreg

Talk Composites - The Forum for Advanced Composites

Back

Gloves sticking to prepreg

Gloves sticking to prepreg

Author	Message
Steve Broad	Steve Broad posted 6 Years Ago HOT Topic Details
Group: Forum Members Posts: 408, Visits: 4.1K	Am I doing it wrong? When laying up prepreg my gloves (from EC) stick so much to the carbon that I end up taking them off. It is particularly bad if heat is used when persuading the stuff into shape.
	Reply Like 3

GO

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Threaded View

Threaded View

Gloves sticking to prepreg

Steve Broad - 6 Years Ago

No, fairly normal. Probably a bit too warm in your work environment, if you can regulate the temperature to about 20 degrees then that's typically when pre-pregs are at their optimum tack. From...

Hanaldo - 6 Years Ago

Normally hardly touch the material apart from picking up Flick the backing off with a blade tip an loosely position 99% of the work then is done with my "dibber" Highly technical composite term there...

f1rob - 6 Years Ago

Hi Rob Yes, I am. That would be great, thanks. If you drop me a line at stephenpbroad@aol.com I will send you my contact details and address. Steve

Steve Broad - 6 Years Ago

after a while you end up with a draw full like this !

f1rob - 6 Years Ago

my main weapons of choice Can laminate virtually anything with these two !!

f1rob - 6 Years Ago

rob you wouldn't believe it but some of the 'experts' i work with are looking at starting a company making dibbers :)

scottracing - 6 Years Ago

That will be cos they can't make anything good in carbon 😁 Better copyright my designs PDQ !!!

f1rob - 6 Years Ago

Similar Topics

Post Quoted Reply

Reading This Topic

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google

Explore

Messages

Mentions

Search