mould making


mould making
View
Options
Author
Message
İlyas Məmmədzadə
İlyas Məmmədzadə
İlyas Məmmədzadə
posted 7 Years Ago HOT
Junior Member (6 reputation)Junior Member (6 reputation)Junior Member (6 reputation)Junior Member (6 reputation)Junior Member (6 reputation)Junior Member (6 reputation)Junior Member (6 reputation)Junior Member (6 reputation)Junior Member (6 reputation)
Group: Forum Members
Posts: 1, Visits: 3
Hello Is it ok to wrap the bonnet with a transparent vinyl before starting the moulding?  In order not to damage the bonnet paint. 
thanks
Reply Like 2
Replies
Hanaldo
Hanaldo
Hanaldo
posted 7 Years Ago HOT
Supreme Being (21K reputation)Supreme Being (21K reputation)Supreme Being (21K reputation)Supreme Being (21K reputation)Supreme Being (21K reputation)Supreme Being (21K reputation)Supreme Being (21K reputation)Supreme Being (21K reputation)Supreme Being (21K reputation)
Group: Forum Members
Posts: 2.5K, Visits: 28K
It is fine as long as you are using PVA release agent. Otherwise the gelcoat will attack the vinyl. 
Reply Like 2
Jaspen
Jaspen
Jaspen
posted 7 Years Ago HOT
Forum Guru (55 reputation)Forum Guru (55 reputation)Forum Guru (55 reputation)Forum Guru (55 reputation)Forum Guru (55 reputation)Forum Guru (55 reputation)Forum Guru (55 reputation)Forum Guru (55 reputation)Forum Guru (55 reputation)
Group: Forum Members
Posts: 9, Visits: 24
 
Hanaldo - 2/9/2018 6:13:56 AM
It is fine as long as you are using PVA release agent. Otherwise the gelcoat will attack the vinyl. 

I am a bodykit manufacturer in HongKong. According to my 6 years experience on Hood molding. It was impossbile not to not
damage the bonnet paint for no matter what protections that you do!  Its just maybe damaged minor only!
Reply Like 2
GO

Merge Selected

Merge into selected topic...



Merge into merge target...



Merge into a specific topic ID...



Submit

Threaded View
Threaded View
mould making
İlyas Məmmədzadə - 7 Years Ago
     It is fine as long as you are using PVA release agent. Otherwise the gelcoat will attack the vinyl.
Hanaldo - 7 Years Ago
             I am a bodykit manufacturer in HongKong. According to my 6 years experience on Hood molding. It was impossbile not tonot damage the bonnet paint for no matter what protections that you do! Its just....
Jaspen - 7 Years Ago
     I think you need to be looking at what is going wrong then... Certainly plug damage is always possible, but it is far from impossible to avoid it.
Hanaldo - 7 Years Ago
     Hello Pleas don't. When you making molding. You will apply gel coat. Resin. Those material will give out heat in chemical reaction with heat. Those will make the vinyl holograms on yr hood. You need...
Jaspen - 7 Years Ago
             Like above, tried it before and the gelcoat weakened the vinyl making it soft and giving it some wrinkles...the curing of a mould can go up in temperatures till 70°C if thick lay up so this will...
matthieutje65 - 7 Years Ago

Similar Topics

Post Quoted Reply
Reading This Topic

Powered by InstantForum 2017-0 Final © 2025
Execution: 0.000. 3 queries. Compression Enabled.
Explore
Messages
Mentions
Search