Talk Composites - The Forum for Advanced Composites
Back
Login
Register
Login
Register
Home
»
Advanced Composites Forum
»
Resin Infusion
»
perforated release film
perforated release film
Post Reply
Like
3
perforated release film
View
Flat Ascending
Flat Descending
Threaded
Options
Subscribe to topic
Print This Topic
Goto Topics Forum
Author
Message
rallyfly
rallyfly
posted 9 Years Ago
ANSWER
HOT
Topic Details
Group: Forum Members
Posts: 25,
Visits: 85
http://www.ebay.com.au/itm/201425740216?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Had a real hard time removing flow media and peel ply from a fairly complex mould. Do you think this perforated release film would be ok between the flow media and the peel ply ?
perforations are 0.8mm or .031" at 5mm spacing
Thanks
Rod.
Reply
Like
3
Replies
Hanaldo
Hanaldo
posted 9 Years Ago
ANSWER
HOT
Post Details
Group: Forum Members
Posts: 2.5K,
Visits: 28K
Yeh I can see why it would make removing the consumables hard.
I think you're making life harder than it needs to be though, there's no need to feed the tube through the mould? Just infuse it regularly with a infusion connector.
Reply
Like
3
rallyfly
rallyfly
posted 9 Years Ago
ANSWER
HOT
Post Details
Group: Forum Members
Posts: 25,
Visits: 85
Your probably right bud , I just thought I could get a more reliable seal on a nice flat surface rather than wrinkly vac bag. I have sanded the aft sides nice and smooth and flat where the tubes go through.
I use flanged bush which slides over the tube and sealed with a tack tape doughnut against the mould.
Reply
Like
3
GO
Merge Selected
Merge into selected topic...
Merge into merge target...
Merge into a specific topic ID...
Open Merge
Threaded View
Threaded View
perforated release film
rallyfly
-
9 Years Ago
Yep that will work fine. Even better is the 'bread wrap' that Easy Composites have.
Hanaldo
-
9 Years Ago
Thankyou Hanaldo , I appreciate your input. Hope you can see my mould attached and the detail in the...
rallyfly
-
9 Years Ago
Yeh I can see why it would make removing the consumables hard. I think you're making life harder...
Hanaldo
-
9 Years Ago
Your probably right bud , I just thought I could get a more reliable seal on a nice flat surface...
rallyfly
-
9 Years Ago
Post Reply
Like
3
Similar Topics
Post Quoted Reply
Reading This Topic
Login
Login
Remember Me
Reset Password
Resend Validation Email
Login
Facebook
Google
Explore
Messages
Mentions
Search