How To: Carbon fiber and Nomex Honeycomb (Spacegrade)

Talk Composites - The Forum for Advanced Composites

Back

How To: Carbon fiber and Nomex Honeycomb (Spacegrade)

Author	Message
Matthieu Libeert	Matthieu Libeert posted 10 Years Ago HOT Topic Details
Group: Forum Members Posts: 955, Visits: 3.4K	Hi everyone, I've just uploaded a new video on my youtube-channel that might interest some of you https://youtu.be/EHLSzEmWzJs (click link above) All of this was done with materials from EC I did thes parts for a friend of mine called whaleboat, you can see the teaser of the boatproject on following link https://www.youtube.com/watch?v=epHNYa6qc6s Greetings MAT2COMPOSITES Matthieu Libeert Founder MAT2 Composites X Sports website: www.mat2composites.com
	Reply Like 3
Reply
Matthieu Libeert	Matthieu Libeert posted 10 Years Ago HOT Post Details
Group: Forum Members Posts: 955, Visits: 3.4K	AlessandroPA (09/06/2015) Hi Mathieu, I had a look at your video, very interesting and useful. Can you make a brief of the materials you have used in the sequence with their characteristics, and the technique for each one (vacuum, infusion, hand lay up)? Thanks matthieutje65 (04/06/2015) used the GC50 for UV protection so it doesn't need to be clearcoated at the end. and was also good for a tack while positioning the carbon The fiberglass was due to the fact I didn't had a 200g/m² cf at the moment carbonfiber would ofcourse be better! I'll add a "products used" in the description of the video soon. All materials are from Easycomposites so you should be able to find some characteristics and so on on their website then Matthieu Libeert Founder MAT2 Composites X Sports website: www.mat2composites.com
	Reply Like 3

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Threaded View

How To: Carbon fiber and Nomex Honeycomb (Spacegrade)

matthieutje65 - 10 Years Ago

Thanks for posting, really well put together and informative video. can I ask why you use fg...

VVS - 10 Years Ago

used the GC50 for UV protection so it doesn't need to be clearcoated at the end. and was also good...

matthieutje65 - 10 Years Ago

Hi Mathieu, I had a look at your video, very interesting and useful. Can you make a brief of the...

AlessandroPA - 10 Years Ago

[quote][b]AlessandroPA (09/06/2015)[/b][hr] Hi Mathieu, I had a look at your video, very interesting...

matthieutje65 - 10 Years Ago

Nice work as always . Chris Carbon fibre works LTD

carbonfibreworks - 10 Years Ago

Awesome video! Well done and thank you. Quite a lot of work, I didn't realise the inner and outer...

redeye - 10 Years Ago

Matt so GC50 do not need clear coat can be polished and u good? no UV problem?

TomDesign - 10 Years Ago

Great video as always! makes me feel the need to tidy up my workshop and get some decent lighting;)...

Bonobo - 10 Years Ago

Another great vid. Your videos always look very professionally shot; can I ask how you're shooting...

FLD - 10 Years Ago

Another great video! You've managed to make what could be quite a complicated project look quite...

Warren (Staff) - 10 Years Ago

I feel your pain removing the soft flow mesh from the peel ply. Have you used the bread wrap...

VVS - 10 Years Ago

Thanks everyone! To answer some of your questions: @TomDesign: As far as I know they can be...

matthieutje65 - 10 Years Ago

As you know I'm very new to this so when I call at EC I make sure to ask lots of questions, I used...

VVS - 10 Years Ago

thanks for letting me know. heard about the technique and planned doing it. But while doing the lay...

matthieutje65 - 10 Years Ago

We do recommend using the bread wrap or even perforated release film for difficult parts between the...

Warren (Staff) - 10 Years Ago

Thanks for the info and picture warren, will give it a go next time ;)

matthieutje65 - 10 Years Ago

Excellent video. Thanks for taking the time to shoot and share.

cr34tive - 10 Years Ago

Reading This Topic

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google