Westfield Dashboard

Author	Message
wozza	wozza posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 688, Visits: 5.4K	dbcrx (12/12/2013) nice. did you spray clear gel over the rest of the mould as well or just the red? Hi, on the cycle wings the red went down first followed by clear GC50 to help with stone chips/UV. On the dash I just did a resin rich infusion after the red had tacked off. Warren Carbon Copies Ltd
	Reply Like 3
dbcrx	dbcrx posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 46, Visits: 1.2K	nice. did you spray clear gel over the rest of the mould as well or just the red?
	Reply Like 2
wojtepanik	wojtepanik posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 102, Visits: 582	Damn, it looks MAD!!! Love to follow your projects! Bye Wojtek from Poland ~~~Everytime I hear sound of demoulding part I have eargasm~~~
	Reply Like 3
wozza	wozza posted 12 Years Ago HOT Topic Details
Group: Forum Members Posts: 688, Visits: 5.4K	A few months back I made some cycle wings with red gelcoat edges for a customer with a Westfield sportscar. I have just completed a dashboard using the same technique. They are done using pigmented GC50 sprayed into the mould before infusion. It has taken some experimentation to get the timing right. Remove the masking tape too soon and you loose the crisp edge of the line, leave it too long and the gelcoat will lift from the mould when you remove the masking tape. Warren Carbon Copies Ltd
	Reply Like 3